On-line Hanning Smoothing Option

BW	Bandwidth	Single IF Mode$^{(1)}$		Two IF Mode$^{(2)}$		Four IF Mode$^{(3)}$
Code	MHz	No.	Freq. Separ.	No.	Freq. Separ.	No.	Freq. Separ.
		Chan. $^{(4)}$	kHz	Chan.$^{(4)}$	kHz	Chan.$^{(4)}$	kHz
0	50	8	6250	4	12500	2	25000
1	25	16	1562.5	8	3125	4	6250
2	12.5	32	390.625	16	781.25	8	1562.5
3	6.25	64	97.656	32	195.313	16	390.625
4	3.125	128	24.414	64	48.828	32	97.656
5	1.5625	256	6.104	128	12.207	64	24.414
6	0.78125	256	3.052	128	6.104	64	12.207
8	0.1953125$^{(5)}$	128	1.526	64	3.052	32	6.104
9	0.1953125	256	0.763	128	1.526	64	3.052

Notes :
(1) Observing Modes 1A, 1B, 1C, and 1D.
(2) Observing Modes 2AB, 2AC, 2AD, 2BC, 2BD, and 2CD.
(3) Observing Mode 4, PA and PB.
(4) These are the numbers of frequency channels produced in the Array Processor. Any number of channels that is a power of 2, that is less than or equal to the number in the table, and that is greater than or equal to 4 may be selected using the data selection parameters on the DS card. When using on-line Hanning smoothing, data have to be selected, even if one wants the default total number of channels, rather than a subset. observe by default selects all channels.
(5) Specify a bandwidth of 391 kHz in loser for bandwidth code 8.