next up previous contents
Next: On-line Hanning Smoothing Option Up: Bandwidth and Number of Previous: Bandwidth and Number of   Contents

Normal Mode

BW Bandwidth Single IF Mode$^{(1)}$ Two IF Mode$^{(2)}$ Four IF Mode$^{(3)}$
Code MHz No. Freq. Separ. No. Freq. Separ. No. Freq. Separ.
Chan. $^{(4)}$ kHz Chan. $^{(4)}$ kHz Chan. $^{(4)}$ kHz
0 50 16 3125 8 6250 4 12500
1 25 32 781.25 16 1562.5 8 3125
2 12.5 64 195.313 32 390.625 16 781.25
3 6.25 128 48.828 64 97.656 32 195.313
4 3.125 256 12.207 128 24.414 64 48.828
5 1.5625 512 3.052 256 6.104 128 12.207
6 0.78125 512 1.526 256 3.052 128 6.104
8 0.1953125$^{(5)}$ 256 0.763 128 1.526 64 3.052
9 0.1953125 512 0.381 256 0.763 128 1.526
Notes :
(1) Observing Modes 1A, 1B, 1C, and 1D.
(2) Observing Modes 2AB, 2AC, 2AD, 2BC, 2BD, and 2CD.
(3) Observing Mode 4, PA and PB.
(4) These are the numbers of frequency channels produced in the Array Processor. Any number of channels that is a power of 2, that is less than or equal to the number in the table (with a maximum of 512), and that is greater than or equal to 4 may be selected using the data selection parameters on the DS card.
(5) Specify a bandwidth of 391 kHz in loser for bandwidth code 8.


next up previous contents
Next: On-line Hanning Smoothing Option Up: Bandwidth and Number of Previous: Bandwidth and Number of   Contents
Stephan Witz 2003-04-15