VLA calibrator information for 0359+5057

This page summarizes the information for 0359+5057 as found in the original VLA calibrator list and, if found there, a link to search the NRAO VLA Archive Survey (NVAS) for calibrator data before 2010. Furthermore, a table with the most recent approximate flux densities, starting from 2017 as mined from the VLA CASA pipeline is presented.

If shown at the top, we have recovered the original, pre-WIDAR ANTSOL flux density solutions from the period roughly 2000-2007; symbols as explained next.
The mined data are plotted (gray, on the left hand side) as function of (log) frequency on the top and as function of time on the bottom. The frequency band symbols in the bottom panel follow the symbols as outlined in the top panel:

4-band  (~75 MHz) horizontal stripe       X-band (~10.0 GHz) cross
P-band (~350 MHz) open triangle        U/Ku-band (~15.0 GHz) filled square
L-band (~1.5 GHz) VLA-Y shape             K-band (~22.2 GHz) open circle
S-band (~3.0 GHz) filled triangle      A/Ka-band (~33.2 GHz) 6-pointed star
C-band (~6.0 GHz) open square             Q-band (~45.0 GHz) filled circle
Assume a 10% flux density error on each point, up to 30% for the higher frequency data points. The dashed lines in the frequency plot indicate the approximate spectral index in the frequency band (tied to the measured flux density).
Depending on the spectral behavior, different receiver observing bands (as indicated with the log-frequency axis) may have very different typical flux densities. Note that there can be significant flux density changes for different array configurations, which start date is indicated at the top of the time-line figure. Calendar years are separated by vertical dotted lines.
If shown, a curve depicts a fit to the (unweighted) average data for each band (if there are more than two bands with measured flux densities). The fit equation is listed at the top where the x-coordinate represents the base-10 log of the frequency (GHz) and the y-coordinate represents the base-10 log of the flux density (mJy/bm). The fit may use more data than shown and is using data with different time stamps, which means typically different flux densitities in a single band for genuine variable sources (and/or observed in different array configurations).
Depending on the variability of the source, array configuration and the quality of the data, this fit may, or may not, be representative for the data!

(Click on the figure for a larger view in a new tab/window)

Original (outdated) VLA calibrator list information:
 IAU NAME EQUINOX  PC RA(hh,mm,ss)    DEC(ddd,mm,ss)   POS.REF ALT.NAME
 ===================================================================
 0359+509   J2000  B 03h59m29.747262s  50d57'50.161510"  Aug01         
 0355+508   B1950  B 03h55m45.261400s  50d49'20.286000"
 -----------------------------------------------------
 BAND        A B C D    FLUX(Jy)    UVMIN(kL)  UVMAX(kL)
 =====================================================
  20cm    L  X S P P       5.30                       15
   6cm    C  S P P P       3.00
 3.7cm    X  S S S S       5.10
   2cm    U  S S S S       3.50
 0.7cm    Q  S S S S       5.50 

Default NVAS search around this position (in new tab/window)

Results from CASA pipeline flux density mining:
Observing date (UT)Flux density (Jy/bm)Source name used
L-band data ("VLA Y-arm" symbols)
201708224.759J0359+5057
201708254.755J0359+5057
201708264.769J0359+5057
201711164.558J0359+5057
201811245.138J0359+5057
201811255.094J0359+5057
201812295.083J0359+5057
S-band data (filled triangles)
201708226.525J0359+5057
201812248.323J0359+5057
201901018.482J0359+5057
C-band data (open squares)
201705269.555J0359+5057
201705279.547J0359+5057
2017082210.081J0359+5057
201711259.622J0359+5057
202204235.367J0359+5057
202204295.332J0359+5057
Q-band data (filled circles)
201812235.189J0359+5057
201902025.346J0359+5057
201902244.872J0359+5057
201904159.029J0359+5057
201905145.215J0359+5057