AIPS version = /home/auto/aips/31DEC06/LINUX/SYSTEM/VLA_PIPE/aips Prep version = Oct 16 14:29 /home/hamal/vlbacald/bin/AVLAPREP.001 Pipe version = Oct 18 16:00 /home/hamal/vlbacald/bin/AVLAPIPE.001 Post version = Oct 13 15:58 /home/hamal/vlbacald/bin/AVLAPOST.001 /home/hamal/vlbacald/run/AK485_2000MAR03_1.0.run started on Wed Oct 18 16:59:16 MDT 2006 ------------- START_AIPS: Your initial AIPS printer is the GNU Ghostview X-windows previewer START_AIPS: - system name gv, AIPS type PREVIEW START_AIPS: User data area assignments: (Using global default file /home/auto/aips/DA00/DADEVS.LIST for DADEVS.PL) Disk 1 (1) is /DATA/HAMAL_1 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on HAMAL asynchronously... Starting up 31DEC06 AIPS with normal priority AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number ?AIPS 2: 31DEC06 AIPS: AIPS 2: Copyright (C) 1995-2006 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history *not* recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit >>>AIPS 2: Found in Version=ABIN AIPS 2: $ Lorant Sjouwerman, versions 1.. 2005, for NRAO AIPS 2: AIPS 2: $$ General naming utilities - default to data disk 1 (safest of all) AIPS 2: procedure pipedef1 AIPS 2: string*12 pnam AIPS 2: string*6 pcls AIPS 2: scalar pseq,pdsk AIPS 2: pdsk=1 AIPS 2: finish AIPS 2: pipedef1 AIPS 2: procedure namepipe AIPS 2: pnam=inname;pcls=inclass;pseq=inseq;indisk=pdsk AIPS 2: finish AIPS 2: procedure pipename AIPS 2: inname=pnam;inclass=pcls;inseq=pseq;indisk=pdsk AIPS 2: finish AIPS 2: AIPS 2: procedure checkcat AIPS 2: $LOS - count and make sure catalog starts at one (and not more t han 10 files) AIPS 2: scalar numcat AIPS 2: clrname;indisk=pdsk;chkname;numcat=1-error AIPS 2: $ for later: find out how to deal with CH0/LINE data in MOVE AIPS 2: if(numcat>0)then;recat;end;clrtemp AIPS 2: return numcat AIPS 2: finish AIPS 2: AIPS 2: procedure gx AIPS 2: $ inputs AIPS 2: go;wait AIPS 2: finish AIPS 2: AIPS 2: procedure pre_fillm AIPS 2: $LOS - sets VLA archive defaults for fillm AIPS 2: default fillm;outdisk=pdsk;doall=1;douvcomp=-1;cparm(8)=0.05;b parm(10)=0.75 AIPS 2: finish AIPS 2: AIPS 2: procedure fname AIPS 2: return inname!!'.'!!inclass!!'.'!!char(inseq) AIPS 2: finish AIPS 2: AIPS 2: procedure del AIPS 2: error=1;zap AIPS 2: finish AIPS 2: AIPS 2: procedure skipdata AIPS 2: $LOS - delete unwanted data sets - currently all but continuum X and C bands AIPS 2: $ if(inclass='LINE')then;del;inclass'CH 0';del;type'ZAP LINE :' fname;end AIPS 2: if((inclass='CH 0')!(inclass='LINE'))then;del;type'ZAP LINE :' fname;end AIPS 2: if(inclass='4 BAND')then;del;type'ZAP 4-BAND :'fname;end AIPS 2: if(inclass='P BAND')then;del;type'ZAP P-BAND :'fname;end AIPS 2: $ if(inclass='L BAND')then;del;type'ZAP L-BAND :'fname;end AIPS 2: $ if(inclass='U BAND')then;del;type'ZAP U-BAND :'fname;end AIPS 2: $ if(inclass='K BAND')then;del;type'ZAP K-BAND :'fname;end AIPS 2: $ if(inclass='Q BAND')then;del;type'ZAP Q-BAND :'fname;end;clrt emp AIPS 2: if(error<1)then $ file not zapped, check for single dish vlbi; #vis=0 AIPS 2: task'TABGET';userid 0;inext'NX';invers=0;keyvalue=0;keystrng '' AIPS 2: keyword'NUM ROW';getthead;pixxy=keyvalue(1),6,0;tabget;clrte mp AIPS 2: if(keyvalue(1)=0)then;del;type'ZAP S-DISH :'fname;end AIPS 2: end AIPS 2: $also zap if solar/planetary/pulsar mode - su table proper motio n?? AIPS 2: $ and what about PT-link? antenna VPT is not OUT, later also EV LA names AIPS 2: finish AIPS 2: AIPS 2: procedure checkids AIPS 2: $LOS - account for fast switching source names - check on pos, q ual, calco AIPS 2: scalar ra1a,ra1b,ra2a,ra2b,dc1a,dc1b,dc2a,dc2b,n,m,l,idx AIPS 2: scalar q1,q2 AIPS 2: string*1 co1,co2 AIPS 2: string*16 n1,n2 AIPS 2: array alist(100),blist(100) AIPS 2: inext'SU';invers 0;keyword'NUM ROW';keyvalue 0;keystrng'';gett head AIPS 2: n=keyvalue(1);idx=1;aparm 0;bparm 0;alist 0;blist 0 AIPS 2: if (n > 1) then AIPS 2: for m=1:(n-1);clrtemp AIPS 2: pixxy m,11;tabget;ra1a keyvalue(1);ra1b keyvalue(2) AIPS 2: for l=(m+1):n;clrtemp AIPS 2: pixxy l,11;tabget;ra2a keyvalue(1);ra2b keyvalue(2) AIPS 2: if (abs(ra1a-ra2a)=0) then AIPS 2: if ( abs((ra1b-ra2b)*3600*1000) < 3 ) then $ RA within 3 mas! AIPS 2: pixxy m,12;tabget;dc1a keyvalue(1);dc1b keyvalue(2) AIPS 2: pixxy l,12;tabget;dc2a keyvalue(1);dc2b keyvalue(2) AIPS 2: if (abs(dc1a-dc2a)=0) then AIPS 2: if ( abs((dc1b-dc2b)*3600*1000) < 3 ) then $ DC wi thin 3 mas! AIPS 2: pixxy m,3;tabget;q1 keyvalue(1);pixxy l,3;tabget ;q2 keyvalue(1) AIPS 2: if (q1=q2) then $ same qualifier; same calcode? AIPS 2: pixxy m,4;tabget;co1 keystrng;pixxy l,4;tabget ;co2 keystrng AIPS 2: if (co1=co2) then AIPS 2: pixxy m,1;tabget;q1 keyvalue(1) AIPS 2: pixxy l,1;tabget;q2 keyvalue(1) AIPS 2: pixxy m,2;tabget;n1 keystrng;pixxy l,2;tabge t;n2 keystrng AIPS 2: if (idx>100) then; AIPS 2: type 'TOO MANY SOURCES TO DO DSORC - DO BY HAND!' AIPS 2: type 'NEXT =.'!!char(idx)!!' DO:'!!char(l)! !'.&.'!!char(m) AIPS 2: else AIPS 2: if (length(n1)1) then;task'DSORC';n=0 AIPS 2: outname inname;outclass inclass;outseq inseq;outdisk indis k AIPS 2: while (n100)then;type'TOO MANY SOURCES FOR DSORC';error 1;end ;clrtemp AIPS 2: end AIPS 2: finish AIPS 2: AIPS 2: procedure checkcal AIPS 2: $LOS Currently (Sep 22, 2005) can/will do 3C286 and 3C48 at X and C AIPS 2: $LOS (and for now skip 3C286/3C48/3C138/3C147 Q,K,U and 3C48 L ) AIPS 2: scalar idx,jdx AIPS 2: string*16 sname AIPS 2: task'TABGET';userid 0;inext'SU';invers=0;keyvalue=0;keystrng'' ;error=1 AIPS 2: keyword'NUM ROW';getthead;idx=keyvalue(1);clrtemp AIPS 2: for jdx=1:idx AIPS 2: pixxy=jdx,2,0;tabget;sname=substr(keystrng,1,length(keystrng )) AIPS 2: if(sname='3C286')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='3C48')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='3C138')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='3C147')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='3C295')then;error=-1;jdx=idx+1;end AIPS 2: if(error>0)then $ try B1950 name AIPS 2: if(sname='1328+307')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='0134+329')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='0518+165')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='0538+498')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='1409+524')then;error=-1;jdx=idx+1;end AIPS 2: if(error>0)then $ try J2000 AIPS 2: if(sname='1331+305')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='0137+331')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='0521+166')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='0542+498')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='1411+522')then;error=-1;jdx=idx+1;end AIPS 2: if(error>0)then $ try J2000 name AIPS 2: if(sname='J1331+3030')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='J0137+3309')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='J0521+1638')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='J0542+4951')then;error=-1;jdx=idx+1;end AIPS 2: if(sname='J1411+5212')then;error=-1;jdx=idx+1;end AIPS 2: end;end;end;clrtemp AIPS 2: end AIPS 2: $ if error>0 check on coords (for different name than standard) AIPS 2: $ but keyval not reliable to do this.. ?? AIPS 2: $ end AIPS 2: if(error>0)then;del;type'ZAP - NO STD CAL SRC FOR :'fname;erro r=1 AIPS 2: else;checkids;error=-1;end;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure j2000fix AIPS 2: $LOS - convert data to J2000 by default use of uvfix AIPS 2: task'UVFIX';outname=inname;outclass=inclass;outseq=inseq;outdi sk=indisk AIPS 2: shift=0;uvfixprm=0;tput uvfix;outclass'PREFIX';rename AIPS 2: tget uvfix;inclass'PREFIX';gx;zap;inclass=outclass;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure datachks AIPS 2: $LOS - delete unwanted data sets, check for standard calibrators and make J2000 AIPS 2: if(error<1)then $ file exists AIPS 2: skipdata;if(error<1)then $ file was not zapped AIPS 2: checkcal;if(error<1)then $ file has standard calibrator i n it AIPS 2: j2000fix AIPS 2: $ addcalco AIPS 2: end;end;end;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure freqchks AIPS 2: $LOS - split up in frequency IDs, run INDXR, and remove AIPS 2: scalar rows, nfrq AIPS 2: if(error<1)then $ file exists AIPS 2: inext'FQ';invers=1;keyword='NUM ROW';getthead;nfrq=keyvalue( 1) AIPS 2: if (nfrq > 1) then AIPS 2: if (nfrq > 9) then;type' WARNING! MORE THAN 9 FREQUENCY ID -S!';end AIPS 2: tput getthead;default'UVCOP';tget getthead;keyword='';task 'UVCOP';tput AIPS 2: for rows=1:nfrq AIPS 2: pixxy=rows,1,1;inver=1;inext='FQ';tabget;tget;freqid=key value(1) AIPS 2: outclass=substr(inclass,1,1)!!substr(inclass,3,6)!!char( freqid) AIPS 2: type'COPYING FREQUENCY ID #'!!char(freqid);gx AIPS 2: default'INDXR';tget uvcop;task'INDXR';inclass outclass;g x;task'DQUAL' AIPS 2: $out not in! ** outname=inname;outclass=inclass;outseq=inseq;out disk=indisk;gx AIPS 2: tget uvcop;freqid=1;clrtemp AIPS 2: end;end;end;if(nfrq>1)then;type fname!!' SPLIT IN :'!!char(nfr q);zap;end AIPS 2: finish AIPS 2: AIPS 2: procedure pre_move AIPS 2: $LOS - moves file to another AIPS user number AIPS 2: default move;indisk=pdsk;outseq=-1;opcode'MOVE';clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure expid AIPS 2: string*20 expnm AIPS 2: string*75 expmsg AIPS 2: return expnm AIPS 2: finish AIPS 2: type expid AIPS 2: ' ' >AIPS 2: Found in Version=ABIN AIPS 2: $ AIPS 2: $ Ver 1.0 : Copy of private Ver 3.0 of VLARUN (public version is 2.5): AIPS 2: $ was 3.0 : Add PLVER (in goplt) for plot files and to include T ASAV (12MAY04) AIPS 2: $ Repositioned inseq=0 to safeguard to SU-tab confusio n (12NOV04) AIPS 2: $ Rearanged inputs and options, added integration time calculation, AIPS 2: $ QUACK, selective plotting, INNAME vs DOCAT, alternat ive flux cal, AIPS 2: $ selective imaging, SCIMG for targets, use model in C ALIB, find VLA AIPS 2: $ array, use model,.. AIPS 2: $ AIPS 2: $Next vers add polarization calibration, SCIMG->SCIMG? AIPS 2: $ find imsize, find cutoffflux, include infi le AIPS 2: $--------------------------------------------------------------- AIPS 2: $000000001111111111222222222233333333334444444444555555555566666 6666677777777778 AIPS 2: $234567890123456789012345678901234567890123456789012345678901234 5678901234567890 AIPS 2: $=============================================== AIPS 2: $! Calibrating amplitude and phase, and imaging VLA data AIPS 2: $# RUN POPS VLA UTILITY CALIBRATION IMAGING AIPS 2: $--------------------------------------------------------------- AIPS 2: $; Copyright (C) 2002-2006 AIPS 2: $; Associated Universities, Inc. Washington DC, USA. AIPS 2: $; AIPS 2: $; This program is free software; you can redistribute it and/o r AIPS 2: $; modify it under the terms of the GNU General Public License as AIPS 2: $; published by the Free Software Foundation; either version 2 of AIPS 2: $; the License, or (at your option) any later version. AIPS 2: $; AIPS 2: $; This program is distributed in the hope that it will be usef ul, AIPS 2: $; but WITHOUT ANY WARRANTY; without even the implied warranty of AIPS 2: $; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See th e AIPS 2: $; GNU General Public License for more details. AIPS 2: $; AIPS 2: $; You should have received a copy of the GNU General Public AIPS 2: $; License along with this program; if not, write to the Free AIPS 2: $; Software Foundation, Inc., 675 Massachusetts Ave, Cambridge, AIPS 2: $; MA 02139, USA. AIPS 2: $; AIPS 2: $; Correspondence concerning AIPS should be addressed as follow s: AIPS 2: $; Internet email: aipsmail@nrao.edu. AIPS 2: $; Postal address: AIPS Project Office AIPS 2: $; National Radio Astronomy Observatory AIPS 2: $; 520 Edgemont Road AIPS 2: $; Charlottesville, VA 22903-2475 USA AIPS 2: $--------------------------------------------------------------- AIPS 2: $=============================================================== AIPS 2: AIPS 2: procedure pipeinit AIPS 2: scalar lsdisk,lsname,lsrant,lscont,lserr,lsplot,lsflag,k,lsflu x,lstarg,lsmodl AIPS 2: scalar lsids,star,tint,fsw,kj AIPS 2: string*2 lstyp AIPS 2: string*3 lsvla AIPS 2: string*6 lsidc,lsstrng AIPS 2: string*16 lsidn,lscal AIPS 2: string*16 lsampcal(20),lsbndcal(5),lsphacal(20),lspntcal(25),l sallcal(30), AIPS 2: array lsbadd(10),lsparm(16),lssid(1000) $ D=1,C=3.3,B=10.8,A=3 5.4,PT=73 AIPS 2: finish AIPS 2: pipeinit AIPS 2: AIPS 2: procedure pipeinpt AIPS 2: lsampcal '3C48', '0134+329','0137+331','J0137+3309' AIPS 2: lsampcal(5)~ '3C138','0518+165','0521+166','J0521+1638' AIPS 2: lsampcal(9)~ '3C147','0538+498','0542+498','J0542+4951' AIPS 2: lsampcal(13)~'3C286','1328+307','1331+305','J1331+3030' AIPS 2: lsampcal(17)~'3C295','1409+524','1411+522','J1411+5212' AIPS 2: lserr=0;lsbadd=baddisk;lsdisk=indisk;lsname=docat AIPS 2: lsidn=inname;lsidc=inclass;lsids=inseq;lstyp'UV';fsw=doalign;l sflag=flagver AIPS 2: lsparm(2)=solint;lsparm(13)=factor;lsrant=refant;lsmodl=domode l AIPS 2: lscal=keystrng;lsflux=flux;lsparm(3)=uvrange(1);lsparm(4)=uvra nge(2) AIPS 2: for k=1:20;lsphacal(k)=sources(k);end;for k=1:5;lsbndcal(k)=ca lsour(k);end AIPS 2: lsparm(11)=dopol;lsparm(12)=bpa;lscont=docont;lsplot=plver;lsp arm(1)=doall AIPS 2: lsparm(5)=doarray;lsparm(6)=imsize(1);lsparm(7)=niter;lsparm(8 )=cutoff AIPS 2: lsparm(9)=docal;lsparm(10)=doresid AIPS 2: $ check input values AIPS 2: $->lsbadd AIPS 2: if (lsdisk<=0) then;lserr=1;type'SPECIFY THE INDISK';end AIPS 2: if(lsname<=0)then;inname=lsidn;inclass=lsidc;inseq=lsids;intyp e=lstyp;chkname AIPS 2: if (error<>0) then AIPS 2: lserr=2; type 'SPECIFY INNAME, ETC, OR THE CATALOG NUMBER = DOCAT' AIPS 2: else AIPS 2: userid=0;k=1;lsname=0 AIPS 2: while (lsname=0);egetname k AIPS 2: if (( (lsidn=inname)&(lsidc=inclass) )&(lsids=inseq)) th en AIPS 2: lsname=k;lsidn=inname;lsidc=inclass;lsids=inseq;lstyp= intype AIPS 2: else;k=k+1;end;end;end;else AIPS 2: if ( ((inname <> '')!(inclass <> '')) ! (inseq <> 0) ) then AIPS 2: lserr=2; type 'DO NOT SPECIFY BOTH INNAME, ETC, AND VARIAB LE DOCAT' AIPS 2: else AIPS 2: getname(lsname);lsidn=inname;lsidc=inclass;lsids=inseq;lst yp=intype AIPS 2: end AIPS 2: end AIPS 2: AIPS 2: $->inname AIPS 2: $->inclass AIPS 2: $->inseq AIPS 2: $->fsw AIPS 2: $->lsflag AIPS 2: if (lsparm(2)<=0) then; lserr=3; type 'SPECIFY THE SOLUTION IN TERVAL';end AIPS 2: if (lsparm(13)<1)then;lsparm(13)=1;type'FACTOR<1 QUESTIONABLE, SET TO 1';end AIPS 2: if (lsrant<=0)then;lsrant=0;type'AIPS WILL CHOOSE THE REFERENC E ANTENNA';end AIPS 2: if ( (lsmodl>0) & (length(lscal)>0) ) then AIPS 2: lserr=4;type 'CANNOT USE STANDARD SOURCE MODEL FOR ALTERNATI VE CALIBRATOR' AIPS 2: end AIPS 2: $->lscal AIPS 2: if (length(lscal)<>0) then AIPS 2: type 'USING NON-STANDARD AMPLITUDE CALIBRATOR, FLUX, UVRAN GE :' AIPS 2: type lscal, lsflux, lsparm(3), lsparm(4);lsampcal='';lsamp cal(1)=lscal AIPS 2: end AIPS 2: AIPS 2: $->lsflux AIPS 2: $-> #3+#4 uvrange AIPS 2: for i=1:20;for j=1:16;if(substr(lsphacal(i),j,j)='*')then;if ( lserr<>7) then AIPS 2: if((i=1)&(j=1))then;star=1;else; AIPS 2: star=-1;lserr=7;type'ONLY USE * IN THE 1ST CHARACTER OF TH E 1ST SOURCE' AIPS 2: end;end;end;end;clrtemp;end AIPS 2: if (lsname>0) then; indisk=lsdisk; getname(lsname); clrtemp AIPS 2: if ( (inclass='CH 0') & (substr(lsbndcal(1),1,1) = ' ') ) th en AIPS 2: lserr=8;type 'SPECIFY THE BANDPASS CALIBRATOR = CALSOUR' AIPS 2: end;end;clrtemp AIPS 2: $-> #11 dopol AIPS 2: $-> #12 bpa AIPS 2: $->lscont AIPS 2: $->lsplot AIPS 2: if (lsparm(1) > 0) then AIPS 2: if (lsparm(5)<0) then;type 'SETFC WILL DETERMINE THE CELL SI ZE' AIPS 2: else; AIPS 2: if (lsparm(5)=0) then; AIPS 2: keyword='TELESCOP';gethead; AIPS 2: if (substr(keystrng,1,3)<>'VLA') then; AIPS 2: lserr=5; type 'CANNOT DETERMINE ARRAY - THIS IS NOT TH E VLA' AIPS 2: else;keyword'NUM ROW';inext'AN';invers=0;getthead;k=keyv alue(1) AIPS 2: for j=1:k AIPS 2: pixxy=j,1,0;tabget;i=1;clrtemp AIPS 2: while((substr(keystrng,i,i)<>':')&(i<9));i=i+1;end AIPS 2: if (substr(keystrng,i+1,i+1)<>' ')then; AIPS 2: lsvla=substr(keystrng,i+1,i+3);else AIPS 2: lsvla=substr(keystrng,i+2,i+4);end AIPS 2: if ((lsvla<>'OUT')&(lsvla<>'MPD'))then; AIPS 2: if (lsvla='VPT')then;lsparm(5)=75;else AIPS 2: if (substr(keystrng,i+1,i+1)<>' ')then; AIPS 2: keyword=substr(keystrng,i+2,i+8);else AIPS 2: keyword=substr(keystrng,i+3,i+9);end AIPS 2: lsparm(5)=max(lsparm(5),value(keyword));clrtem p;end;end;end AIPS 2: if (lsparm(5)<75) then;if (lsparm(5)>36) then;lsparm(5 )=36;else AIPS 2: if (lsparm(5)>18) then;lsparm(5)=11;else AIPS 2: if(lsparm(5)>9)then;lsparm(5)=3.5;else;lsparm(5)=1;end ;end;end;end AIPS 2: end;if(lsparm(5)=0)then;lserr=5;type'WHAT ARRAY?! USE DO ARRAY';else AIPS 2: if(lsparm(5)>0)then AIPS 2: type char(lsparm(5))!!' KILOMETERS WILL BE USED AS MAX IMUM BASELINE' AIPS 2: end;end;end;end AIPS 2: if (lsparm(6)>=0)then;if((lsparm(6)<128)!(imsize(2)<128))the n AIPS 2: lserr=6; type 'SPECIFY THE IMSIZE CORRECTLY (>127 OR <0)'; end;end AIPS 2: AIPS 2: $-> #7 niter AIPS 2: if (lsparm(7) < 0) then; lsparm(7) = 7e4; end AIPS 2: $-> #8 cutoff AIPS 2: $-> #9 docal AIPS 2: $-> #10 doresid AIPS 2: AIPS 2: end AIPS 2: finish AIPS 2: AIPS 2: procedure getidn AIPS 2: indisk=lsdisk;inname=lsidn;inclass=lsidc;inseq=lsids;intype=ls typ AIPS 2: finish AIPS 2: AIPS 2: procedure getset AIPS 2: default;getidn;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure lsclrcal AIPS 2: $ consolidate lists, deal with calcode='*' later AIPS 2: scalar lsidx,l,m,n AIPS 2: task'TABGET';getset;inext'NX';invers 0;keyvalue=0;keystrng'' AIPS 2: keyword'NUM ROW';getthead;lsidx=keyvalue(1);clrtemp;n=0;lssid= 0 AIPS 2: if (keyvalue(1)>1000)then;type'WARNING: MORE THAN 1000 SCANS ! ';end AIPS 2: for i=1:lsidx $ remember source number AIPS 2: pixxy=i,3,0;tabget;error=0 AIPS 2: for l=1:n;if(lssid(l)=keyvalue(1))then;error=1;end;end;clrte mp AIPS 2: if(error=0)then;n=n+1;lssid(n)=keyvalue(1);end AIPS 2: end;inext'SU';invers 0;keyvalue=0;keystrng'';keyword'NUM ROW' AIPS 2: getthead;lsidx=keyvalue(1);clrtemp;sources'';l=1;m=1;n=1 AIPS 2: for i=1:lsidx AIPS 2: pixxy=i,2,0;tabget;k=length(keystrng);j=0;clrtemp AIPS 2: while (j<20);j=j+1;if (substr(lsampcal(j),1,k)=substr(keystr ng,1,k)) then AIPS 2: lsampcal(l)=lsampcal(j);j=30;lsparm(14)=l;l=l+1;end;end; j=0;clrtemp AIPS 2: while (j<20);j=j+1;if (substr(lsphacal(j),1,k)=substr(keystr ng,1,k)) then AIPS 2: lsphacal(m)=lsphacal(j);j=30;lsparm(15)=m;m=m+1;end;end; j=0;clrtemp AIPS 2: while (j<5);j=j+1;if (substr(lsbndcal(j),1,k)=substr(keystrn g,1,k)) then AIPS 2: lsbndcal(n)=lsbndcal(j);j=30;lsparm(16)=n;n=n+1;end;end; clrtemp AIPS 2: end;lspntcal'';lsallcal'';for j=l:20;lsampcal(j)='';end AIPS 2: for j=m:20;lsphacal(j)='';end;for j=n:5;lsbndcal(j)='';end AIPS 2: for j=1:lsparm(15);lspntcal(j)=lsphacal(j);end;k=lsparm(15) AIPS 2: for j=1:lsparm(16);lspntcal(j+k)=lsbndcal(j);end;j=0;l=1;clrte mp AIPS 2: while (j<(lsparm(15)+lsparm(16)));j=j+1;if (length(lspntcal(j) )>0) then AIPS 2: lspntcal(l)=lspntcal(j);if(l<>j)then;lspntcal(j)='';end;l=l+ 1;end;end AIPS 2: $here - clean up pnt cal for doubles - subtract from total count below AIPS 2: k=lsparm(15)+lsparm(16);for j=1:k;lsallcal(j)=lspntcal(j);end; l=1 AIPS 2: for j=1:lsparm(14);i=length(lsampcal(j));lsidx=0;m=j AIPS 2: while ((lsidx0) then;lsallcal(l)=lsallcal(j) AIPS 2: if(l<>j)then;lsallcal(j)='';end;l=l+1;end;end AIPS 2: $typ 'LSAMPCAL, LSPHACAL, LSBNDCAL, LSPNTCAL, AND LSALLCAL :' AIPS 2: $typ lsampcal; typ lsphacal; typ lsbndcal; typ lspntcal; typ lsa llcal; AIPS 2: return;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure numtab(lsstrng) AIPS 2: keystrng'';j=0;clrtemp AIPS 2: while ((j<15)&(keystrng<>lsstrng)) AIPS 2: j=j+1;keyword'EXTYPE'!!char(j);gethead;end;clrtemp AIPS 2: if (keystrng=lsstrng) then AIPS 2: keyword'EXTVER'!!char(j);gethead;else;keyvalue=0;end AIPS 2: keyword'';keystrng'';clrtemp AIPS 2: return keyvalue(1);finish AIPS 2: AIPS 2: procedure numbasel AIPS 2: scalar numarow,numbout,numbant,numbase,idx;string*16 nameant AIPS 2: numbout=0;keyword'NUM ROW';inext'AN';invers=0;getthead;numarow =keyvalue(1) AIPS 2: for numbant=1:numarow AIPS 2: pixxy=numbant,1,0;tabget;nameant=keystrng;idx=1;clrtemp AIPS 2: while(substr(nameant,idx,idx)<>':');idx=idx+1;end AIPS 2: if(substr(nameant,idx+1,idx+3)='OUT')then;numbout=numbout+1; end AIPS 2: if(substr(nameant,idx+2,idx+4)='OUT')then;numbout=numbout+1; end AIPS 2: end;numbase=(numarow-numbout)*(numarow-numbout-1)/2;clrtemp AIPS 2: $ type char(numarow-numbout)!!' ANTENNAS',char(numbase)!!' BASE LINES' AIPS 2: return numbase AIPS 2: finish AIPS 2: AIPS 2: procedure calcintt AIPS 2: scalar numxrow,numscan,numbbeg,numbend,numcnst,sum,avr,rms,rma x;rmax=300 AIPS 2: array interval(1000),numbvis(1000);avr=0;if(rmax>1000)then;rma x=1000;end AIPS 2: if (numtab('NX')<1) then;type'NOT MULTISOURCE - NO INTTIME CAL CULATED' AIPS 2: else AIPS 2: keyword'NUM ROW';inext'NX';invers 0;getthead;numxrow=keyvalu e(1) AIPS 2: if(numxrow>rmax)then;numxrow rmax;end AIPS 2: for numscan=1:numxrow;clrtemp AIPS 2: pixxy=numscan,2,0;tabget;interval(numscan)=86400*keyvalue( 1) AIPS 2: pixxy=numscan,5,0;tabget;numbbeg=keyvalue(1) AIPS 2: pixxy=numscan,6,0;tabget;numbend=keyvalue(1) AIPS 2: numbvis(numscan)=numbend-numbbeg+1;avr=max(avr,numbvis(num scan)) AIPS 2: end;numcnst=numbasel;sum=0 AIPS 2: if (avr > 0) then AIPS 2: for numscan=1:numxrow;if (numbvis(numscan)>0) then AIPS 2: sum=sum+( (numcnst*interval(numscan)) / numbvis(numsca n) ) AIPS 2: end;end;clrtemp;avr=sum/numxrow;sum=0 AIPS 2: for numscan=1:numxrow;if (numbvis(numscan)>0) then AIPS 2: sum=sum+((numcnst*interval(numscan))/numbvis(numscan)- avr)**2 AIPS 2: end;end;clrtemp;rms=sum/numxrow;clrtemp;end AIPS 2: $ type char(numxrow)!!' SCANS/SAMPLES WITH RMS(SEC) +/-'!!char( rms) AIPS 2: $ type char(avr)!!' SECOND INTEGRATIONS (APPROXIMATELY)' AIPS 2: end AIPS 2: return avr AIPS 2: finish AIPS 2: AIPS 2: procedure guesintt AIPS 2: scalar intcst,intavr,intmod,intime AIPS 2: intavr=calcintt;intcst=intavr;keyword'TELESCOP';gethead AIPS 2: if (keystrng='VLA') then;intcst=1+(2/3);end AIPS 2: if (keystrng='VLBA') then;intcst=0.131072;end AIPS 2: if (intcst=intavr) then;type'UNKNOWN TELESCOPE :'!!keystrng;en d AIPS 2: if (intavr>10) then AIPS 2: $ intime=10*floor(0.5+(intavr/10)) AIPS 2: intime=10*floor(intavr/10) AIPS 2: else;if (intavr>0) then AIPS 2: intmod=mod(intavr,intcst) AIPS 2: $ intime=intcst*((intavr-intmod)/intcst+floor(0.5+(intmod/i ntcst))) AIPS 2: intime=intcst*((intavr-intmod)/intcst+floor(intmod/intcst) ) AIPS 2: else;intime=intavr;end;end;clrtemp AIPS 2: if(numtab('NX')>0)then;type char(intime)!!' SECOND INTEGRATION S (GUESS)';end AIPS 2: return intime AIPS 2: finish AIPS 2: AIPS 2: procedure checkids AIPS 2: $LOS - account for fast switching source names - check on pos, q ual, calco AIPS 2: scalar ra1a,ra1b,ra2a,ra2b,dc1a,dc1b,dc2a,dc2b,n,m,l,idx AIPS 2: scalar q1,q2 AIPS 2: string*1 co1,co2 AIPS 2: string*16 n1,n2 AIPS 2: array alist(100),blist(100) AIPS 2: inext'SU';invers 0;keyword'NUM ROW';keyvalue 0;keystrng'';gett head AIPS 2: n=keyvalue(1);idx=1;aparm 0;bparm 0;alist 0;blist 0 AIPS 2: if (n > 1) then AIPS 2: for m=1:(n-1);clrtemp AIPS 2: pixxy m,11;tabget;ra1a keyvalue(1);ra1b keyvalue(2) AIPS 2: for l=(m+1):n;clrtemp AIPS 2: pixxy l,11;tabget;ra2a keyvalue(1);ra2b keyvalue(2) AIPS 2: if (abs(ra1a-ra2a)=0) then AIPS 2: if ( abs((ra1b-ra2b)*3600*1000) < 3 ) then $ RA within 3 mas! AIPS 2: pixxy m,12;tabget;dc1a keyvalue(1);dc1b keyvalue(2) AIPS 2: pixxy l,12;tabget;dc2a keyvalue(1);dc2b keyvalue(2) AIPS 2: if (abs(dc1a-dc2a)=0) then AIPS 2: if ( abs((dc1b-dc2b)*3600*1000) < 3 ) then $ DC wi thin 3 mas! AIPS 2: pixxy m,3;tabget;q1 keyvalue(1);pixxy l,3;tabget ;q2 keyvalue(1) AIPS 2: if (q1=q2) then $ same qualifier; same calcode? AIPS 2: pixxy m,4;tabget;co1 keystrng;pixxy l,4;tabget ;co2 keystrng AIPS 2: if (co1=co2) then AIPS 2: pixxy m,1;tabget;q1 keyvalue(1) AIPS 2: pixxy l,1;tabget;q2 keyvalue(1) AIPS 2: pixxy m,2;tabget;n1 keystrng;pixxy l,2;tabge t;n2 keystrng AIPS 2: if (idx>100) then; AIPS 2: type 'TOO MANY SOURCES TO DO DSORC - DO BY HAND!' AIPS 2: type 'NEXT =.'!!char(idx)!!' DO:'!!char(l)! !'.&.'!!char(m) AIPS 2: else AIPS 2: if (length(n1)1) then;task'DSORC';n=0 AIPS 2: outname inname;outclass inclass;outseq inseq;outdisk indis k AIPS 2: while (n100)then;type'TOO MANY SOURCES FOR DSORC';error 1;end ;clrtemp AIPS 2: end AIPS 2: finish AIPS 2: AIPS 2: procedure chkobjct AIPS 2: if (( (object='1331+305') ! (object='1328+307') ) ! (object='J 1331+3030') ) AIPS 2: then; object='3C286';end AIPS 2: if (( (object='0137+331') ! (object='0134+329') ) ! (object='J 0137+3309') ) AIPS 2: then; object='3C48';end AIPS 2: if (( (object='0521+166') ! (object='0518+165') ) ! (object='J 0521+1638') ) AIPS 2: then; object='3C138';end AIPS 2: if (( (object='0542+498') ! (object='0538+498') ) ! (object='J 0542+4951') ) AIPS 2: then; object='3C147';end AIPS 2: if (( (object='1411+522') ! (object='1409+524') ) ! (object='J 1411+5212') ) AIPS 2: then; object='3C295';end;clrtemp;return AIPS 2: finish AIPS 2: AIPS 2: procedure checkbnd AIPS 2: band='';j=1 AIPS 2: while (j<9) AIPS 2: keyword='CTYPE'!!char(j);gethead;keyword='CRVAL'!!char(j);cl rtemp AIPS 2: if (keystrng='FREQ') then;gethead;j=9;else;j=j+1;end;end AIPS 2: keyvalue(1)=keyvalue(1)/1e9; AIPS 2: if ( (keyvalue(1)>38) & (keyvalue(1)<51) ) then; band='Q ';end AIPS 2: if ( (keyvalue(1)>20.4) & (keyvalue(1)<25.5) ) then; band='K ';end AIPS 2: if ( (keyvalue(1)>13.5) & (keyvalue(1)<16.3) ) then; band='U ';end AIPS 2: if ( (keyvalue(1)> 6.8) & (keyvalue(1)< 9.6) ) then; band='X ';end AIPS 2: if ( (keyvalue(1)> 4.2) & (keyvalue(1)< 5.1) ) then; band='C ';end AIPS 2: if ( (keyvalue(1)> 1.15) & (keyvalue(1)< 1.75) ) then; band='L ';end AIPS 2: if ( (keyvalue(1)>0.298) & (keyvalue(1)<0.345) ) then; band='P ';end AIPS 2: if ( (keyvalue(1)>0.072) & (keyvalue(1)<0.076) ) then; band='4 ';end;clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure chkmodel AIPS 2: error=0;sysout='';sys2com'' AIPS 2: syscom'ls -1 $AIPSTARS/ AIPS 2: sys2com(1) inname!!'.MODEL' AIPS 2: sys2com(2) ' >& /dev/null AIPS 2: system AIPS 2: finish AIPS 2: AIPS 2: procedure loadmodl AIPS 2: scalar lsidx,l AIPS 2: array lsload(5) AIPS 2: task'TABGET';getset;inext'SU';invers 0;keyvalue=0;keystrng'' AIPS 2: keyword'NUM ROW';getthead;lsidx=keyvalue(1);l=1;clrtemp AIPS 2: for i=1:lsidx AIPS 2: pixxy=i,2,0;tabget;k=length(keystrng);j=1;clrtemp AIPS 2: while (j<21) AIPS 2: if (substr(lsampcal(j),1,k)=substr(keystrng,1,k)) then AIPS 2: lsload(l)=i;j=30;l=l+1;else;j=j+1;clrtemp AIPS 2: end;end;end;lsidx=0;checkbnd;keyword'EPOCH';keyvalue=0;keystrn g='';gethead AIPS 2: if (keyvalue(1)<1999) then;lsidx=1;end AIPS 2: for j=1:(l-1) AIPS 2: object=lsampcal(j);chkobjct;clrtemp;intype'MA';outdisk=lsdis k AIPS 2: inname=object!!'_'!!band;inclass'MODEL';inseq=1;indisk=lsdis k;chkname AIPS 2: $$ if (error>0) then;type lsampcal(lsload(j))!!' MODEL ='inname ;chkmodel AIPS 2: if (error>0) then;type lsampcal(j)!!' MODEL ='inname;chkmode l AIPS 2: if(error<1)then;go calrd;if (lsidx>0) then;eposwtch;end;en d;end $ J2000 AIPS 2: end;return AIPS 2: finish AIPS 2: AIPS 2: procedure vlanew AIPS 2: clrstat;j=numtab('BP');if (j>0) then;inext'BP';invers=-1;extde st;end AIPS 2: j=numtab('CL');if (j>1) then;inext'CL';for k=2:j;invers=k;extd est;end;end AIPS 2: j=numtab('SN');if (j>0) then;inext'SN';invers=-1;extdest;end AIPS 2: j=numtab('XX');if (j>0) then;inext'XX';invers=-1;extdest;end AIPS 2: if (inclass='LINE') then AIPS 2: j=numtab('FG');if (j>1) then;inext'FG';for k=2:j;invers=k;ex tdest;end;end AIPS 2: j=numtab('CL');if (j>1) then;inext'CL';for k=2:j;invers=k;ex tdest;end;end AIPS 2: j=numtab('BP');if (j>0) then;inext'BP';invers=-1;extdest;end AIPS 2: j=numtab('PL');if (j>0) then;inext'PL';invers=-1;extdest;end AIPS 2: end;j=numtab('PL');if (j>0) then;inext'PL';invers=-1;extdest;e nd;clrtemp AIPS 2: type'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL ,XX)' AIPS 2: finish AIPS 2: AIPS 2: procedure allzap AIPS 2: chkname;if(error<1)then;for j=1:(1-error);zap;end;end;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure allplot AIPS 2: tvinit;j=numtab('PL');type 'NUMBER OF PLOT FILES TO SHOW ON TV :'!!char(j) AIPS 2: if (j>0) then AIPS 2: for k=1:j;plver=k;type 'PLOT'char(k)!!'/'!!char(j);go tvpl;r ead;end AIPS 2: else;type 'NOTHING TO PLOT - DONE';end AIPS 2: finish AIPS 2: AIPS 2: procedure goplt0 AIPS 2: if (lsplot>0) then;go;end AIPS 2: finish $SN only AIPS 2: procedure goplt1 AIPS 2: if (lsplot>1) then;go;end AIPS 2: finish $SN+CL AIPS 2: procedure goplt2 AIPS 2: if (lsplot>2) then;go;end AIPS 2: finish $SN+CL+BP AIPS 2: procedure goplt3 AIPS 2: if (lsplot>3) then;go;end AIPS 2: finish $CL,BP applied AIPS 2: AIPS 2: procedure calpipe(lsdisk,lsname,lsrant) AIPS 2: vnum=33;dowait=true;getidn;vlanew;j=0;clrtemp AIPS 2: if (inclass='CH 0') then;inclass'LINE';vlanew;end;clrtemp AIPS 2: if(fsw>0)then;checkids;if(inclass='CH 0')then;inclass'LINE';ch eckids;end;end AIPS 2: if ((numtab('FG')<1)&(lsflag>=0)) then AIPS 2: if (lsflag>=1) then AIPS 2: task'QUACK';getset;flagver=1;opcode'BEG';i=min(3*tint,20) AIPS 2: reason char(i)!!' SEC AUTO-QUACK';aparm=0,i/60,-1;j=1 AIPS 2: while (j<9);keyword='CTYPE'!!char(j);gethead;clrtemp AIPS 2: if(keystrng='FREQ')then AIPS 2: keyword='CRVAL'!!char(j);gethead;keyval(1)=keyval(1)/1 e10;j=9 AIPS 2: if (keyval(1) < 1.8) then;clrtemp;go;else;tput quack AIPS 2: type 'QUACK SKIPPED FOR THIS HIGH FREQUENCY OBSERVAT ION' AIPS 2: type 'MAY BE A FAST-SWITHCING OBS - IE LOSS OF ALL D ATA' AIPS 2: type 'RUN BY HAND IF YOU REALLY WANT THIS QUACK';tge t quack AIPS 2: end;else;j=j+1;end;end AIPS 2: end;task'FLAGR';getset AIPS 2: docal 2;solint=max(3*tint-2,2.7*tint);vector=-1;docrt 0;go AIPS 2: end AIPS 2: task'SNPLT';getset;inext'CL';nplots 8;optype'AMP';vput;pixrang e=0.7,1.8 AIPS 2: goplt1;task'SETJY';getset;optype'REJY';aparm=0;freqid=1;go;opt ype'CALC' AIPS 2: if (length(lscal)<>0) then AIPS 2: optype'';zerosp=lsflux,0;lsallcal=lscal,lspntcal AIPS 2: end;sources=lsampcal;go;clrtemp AIPS 2: task'CALIB';getset;docalib=2;refant=lsrant;aparm=3,0,0,0,0,0,4 ,0,0;calcode'' AIPS 2: solint=lsparm(2);calsour=lspntcal;snver=numtab('SN')+1;solmo de'P' AIPS 2: soltype'L1R';baddisk=lsbadd;vput;kj=0;userid=0;clrtemp AIPS 2: while (kj<9) AIPS 2: kj=kj+1;keyvalue=0;keystrng'';keyword='CTYPE'!!char(kj);ge thead;clrtemp AIPS 2: if(substr(keystrng,1,4)='FREQ')then;keyword='CRVAL'!!char( kj);gethead AIPS 2: kj=10;end;end;vget;if((keyvalue(1))>17e9&(solint>0.5))then;s olint=1/3 AIPS 2: aparm(7)=3.5;vput;type' AUTOMATIC RESET: SOLINT=20SEC (HIG H FREQ)';end AIPS 2: if(star>0)then;calsour'';calcode'*';end;go AIPS 2: if (lsmodl>0) then $ use models for ones that exist AIPS 2: loadmodl;vget calib;calsour='';in2seq=0;in2disk=lsdisk;in2cl ass'MODEL' AIPS 2: for j=1:(l-1) AIPS 2: inext'SU';pixxy=lsload(j),2,0;tabget;calsour(1)=keystrng;c lrtemp AIPS 2: pixxy=lsload(j),4,0;tabget;calcode=substr(keystrng,1,4);cl rtemp AIPS 2: object=lsampcal(j);chkobjct;in2name=object!!'_'!!band AIPS 2: vput calib;inname=in2name;inclass=in2class;inseq=in2seq;in disk=in2disk AIPS 2: $ if no model, use point with full uvrange AIPS 2: chkname;vget calib;if (error>0)then;clr2name;end;go AIPS 2: end;clrtemp AIPS 2: else;uvrange=lsparm(3),lsparm(4);calsour=lsampcal;go;end AIPS 2: vget snplt;inext'SN';optype'PHAS';goplt0;clrtemp AIPS 2: task'CLCAL';getset;freqid=1;refant=lsrant;gainuse=numtab('CL') +1 AIPS 2: snver=numtab('SN');gainver=numtab('CL');sources'';soucode''; AIPS 2: calsour=lsphacal;calcode'';vput;if(star>0)then;calsour'';cal code'*';end;go AIPS 2: calsour=lsallcal;sources=calsour;interpol'SELF' AIPS 2: if(star>0)then;calsour'';calcode'*';soucode'*';end;go AIPS 2: vget snplt;inext'CL';optype'PHAS';goplt1;clrtemp AIPS 2: vget calib;solmode'A&P';calsour=lspntcal;calcode'';snver=numta b('SN')+1 AIPS 2: solint=lsparm(13)*lsparm(2);clr2name;vput AIPS 2: if(star>0)then;calsour'';calcode'*';end;go AIPS 2: if (lsmodl>0) then AIPS 2: loadmodl;vget calib;calsour='';in2seq=0;in2disk=lsdisk;in2cl ass'MODEL' AIPS 2: for j=1:(l-1) AIPS 2: inext'SU';pixxy=lsload(j),2,0;tabget;calsour(1)=keystrng;c lrtemp AIPS 2: pixxy=lsload(j),4,0;tabget;calcode=substr(keystrng,1,4);cl rtemp AIPS 2: object=lsampcal(j);chkobjct;in2name=object!!'_'!!band;calc ode'' AIPS 2: vput calib;inname=in2name;inclass=in2class;inseq=in2seq;in disk=in2disk AIPS 2: $ if no model, use point with full uvrange AIPS 2: chkname;vget calib;if (error>0)then;clr2name;end;go AIPS 2: end;inseq=0;indisk=lsdisk;inclass'MODEL';intype'MA' AIPS 2: for j=1:(l-1) AIPS 2: object=lsampcal(j);chkobjct;inname=object!!'_'!!band;chkna me AIPS 2: if (error<1) then;zap;end;end AIPS 2: else;uvrange=lsparm(3),lsparm(4);calsour=lsampcal;go;end AIPS 2: vget snplt;inext'SN';optype'AMP';goplt0;optype'PHAS';pixrange= -20,20;goplt0 AIPS 2: task'GETJY';getset;calsour=lsampcal;snver=numtab('SN'); AIPS 2: if (star>0) then; AIPS 2: $ for j=1:lsparm(14);sources(j)='-'!!lsampcal(j);end;k=lsparm (14)+1 AIPS 2: $ if (length(lscal)>0) then;sources(k)='-'!!lscal;k=k+1;end AIPS 2: $ for j=k:(25-k+2);sources(j)=lspntcal(j-k+2);end; AIPS 2: soucode='*' AIPS 2: else AIPS 2: sources=lspntcal;if (length(lscal)>0) then;sources(11)='-'!! lscal;end AIPS 2: end;go AIPS 2: if (lscont<1) then AIPS 2: type '****************************************************** **' AIPS 2: type '** WRITE DOWN THE FLUX DENSITIES FOR YOUR CALIBRATORS **' AIPS 2: type '** (AND DO NOT FORGET THE ERRORS EITHER!) **' AIPS 2: type '****************************************************** **';read AIPS 2: end AIPS 2: vget clcal;gainver=numtab('CL');gainuse=numtab('CL')+1;snver=n umtab('SN') AIPS 2: if(star>0)then;calsour'';calcode'*';end;go;calsour=lsallcal;so urces=calsour AIPS 2: interpol'SELF';if(star>0)then;calsour'';calcode'*';soucode'*'; end;go AIPS 2: vget snplt;inext'CL';optype'AMP';goplt1;optype'PHAS';goplt1;cl rtemp AIPS 2: if (inclass='CH 0') then AIPS 2: task'TACOP';getset AIPS 2: outdisk=indisk;outname=inname;outclass'LINE';outseq=inseq; ncount=1 AIPS 2: keystrng'';inext'FG';invers=numtab('FG');if (invers>0) the n;go;end AIPS 2: inext'CL';invers=numtab('CL');keyvalue 0;outseq=inseq;vput ;go;clrtemp AIPS 2: task'BPASS';getset;inclass'LINE';calsour=lsbndcal,lsampcal;d ocal=2 AIPS 2: solint=-1;bpassprm(5)=-1;bpassprm(9)=1;baddisk=lsbadd;go;c lrtemp AIPS 2: task'POSSM';getset;inclass'LINE';bpver 0;aparm=0,1,.4,1.2,-3 0,30,0,2,3,0 AIPS 2: nplots=6;goplt2;sources=lsbndcal;docalib 2;doband 1;aparm= 1 0;aparm(9)=3 AIPS 2: antennas=lsrant,0;goplt2;nplots=0;vput;goplt2;stokes'I';an tennas=0;goplt2 AIPS 2: sources=lsampcal;goplt3 AIPS 2: vget tacop;inclass'LINE';outclass'CH 0';invers=numtab('BP'); inext'BP';go AIPS 2: end;task'TASAV';getset;outdisk=indisk;go;dowait=false;vnum=0;c lrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure calcrms AIPS 2: scalar nbas,nvis,tbw,rms,minhrs AIPS 2: keyword'GCOUNT';gethead;nvis=keyvalue(1);nbas=numbasel;j=1 AIPS 2: minhrs=nvis*tint/(nbas*3600) $ underesimate of obs hours (over estimate rms) AIPS 2: while (j<9) $ bandwidth in a channel, continuum or spectral li ne AIPS 2: keyword='CTYPE'!!char(j);gethead;keyword='CDELT'!!char(j);cl rtemp AIPS 2: if (keystrng='FREQ') then;gethead;j=9;else;j=j+1;end;end;tbw =keyvalue(1) AIPS 2: if (lsidc <> 'CH 0') then;j=1 $ continuum, multiple IFs averag ed AIPS 2: while (j<9) AIPS 2: keyword='CTYPE'!!char(j);gethead;keyword='NAXIS'!!char(j); clrtemp AIPS 2: if(keystrng='IF')then;gethead;j=9;else;j=j+1;end;end;tbw=t bw*keyvalue(1) AIPS 2: end;checkbnd;if((band='P')!(band='4'))then;tbw=tbw/3.2;else;tb w=tbw/50;end AIPS 2: tbw=sqrt(tbw*minhrs/24e6);rms=-1 AIPS 2: if (band='Q')then;rms=3.0e-5/tbw;end;if (band='K')then;rms=2.5 e-5/tbw;end AIPS 2: if (band='U')then;rms=2.0e-5/tbw;end;if (band='X')then;rms=5.3 e-6/tbw;end AIPS 2: if (band='C')then;rms=6.4e-6/tbw;end;if (band='L')then;rms=6.6 e-6/tbw;end AIPS 2: if (band='P')then;rms=1.7e-4/tbw;end;if (band='4')then;rms=1.5 e-2/tbw;end AIPS 2: if (rms<0) then;type 'CANNOT CALCULATE RMS FROM OBSERVING BAND ..';end AIPS 2: typ 'ESTIMATED RMS:' char(rms*1000)!!' MILLI JANSKY' AIPS 2: return rms AIPS 2: finish AIPS 2: AIPS 2: procedure setboxfle AIPS 2: scalar ci,bi AIPS 2: string*12 srcnme AIPS 2: string*48 fbox AIPS 2: srcnme=inname;ci=0;bi=length(srcnme) AIPS 2: while(ci& /dev/null AIPS 2: if(substr(boxfile,1,1)<>' ')then;system;end;clrtemp AIPS 2: finish AIPS 2: AIPS 2: procedure catboxfile AIPS 2: string*20 expnm AIPS 2: string*75 expmsg AIPS 2: sys2com'';syscom 'cat AIPS 2: sys2com(1) 'X'!!boxfile;substr(sys2com(1),1,1)='' AIPS 2: if(substr(expmsg,1,1)<>'')then;sysout=expmsg;else;sysout'';end ;clrtemp AIPS 2: system AIPS 2: finish AIPS 2: AIPS 2: procedure setimsize AIPS 2: scalar szf, kk AIPS 2: string*48 bxf AIPS 2: array szc(2), szi(2), orgc(2), orgi(2) AIPS 2: vput imagr;task'SETFC';sources'';bcount=1;bxf=setboxfle;boxfil e=bxf AIPS 2: bparm=0;infile='';shift=0;flux=0;pbparm=0.25,0;delboxfle AIPS 2: orgc=cellsize;cellsize=0;orgi=lsparm(6);imsize=0;kk=1 AIPS 2: while (kk<9) AIPS 2: keyword='CTYPE'!!char(kk);gethead;keyword='CRVAL'!!char(kk); clrtemp AIPS 2: if (keystrng='FREQ') then;gethead;kk=9;else;kk=kk+1;end;end AIPS 2: keyvalue(1)=keyvalue(1)/1e9;bparm(1)=0.375/keyvalue(1);bparm(2 )=30 AIPS 2: bparm(3)=1;bparm(4)=0;bparm(5)=0.031;bparm(6)=256;bparm(7)=256 ;bparm(8)=100 AIPS 2: gx;bparm(4)=3*bparm(1);bparm(1)=-0.7*bparm(1);bcount=nfield+1 AIPS 2: type'SEARCHING FOR NVSS SOURCES';gx;szf=nfield;szc=cellsize;sz i=imsize AIPS 2: vget imagr;if(lsparm(5)<0)then;cellsize=szc;else;cellsize=orgc ;end AIPS 2: if(lsparm(6)<0)then;imsize=256;nfield=szf;boxfile=bxf;else;ims ize=orgi;end AIPS 2: vput imagr AIPS 2: finish AIPS 2: AIPS 2: procedure imapipe(k,lsdisk,lsname) AIPS 2: vnum=33;dowait=true AIPS 2: if (k=1) then AIPS 2: task'SPLIT';getset;outdisk=indisk;outclass=inclass;docalib=2 AIPS 2: baddisk=lsbadd;douvcomp=-1;go AIPS 2: if (inclass='CH 0') then;inclass'LINE';outclass=inclass;doba nd=1;bpver=0 AIPS 2: go;end;end;clrtemp AIPS 2: task'TABGET';getset;inext'SU';invers=0;keyvalue=0;keystrng'';v put;clrtemp AIPS 2: task'IMAGR';getset;outdisk=indisk;flux=lsparm(8);baddisk=lsbad d;j=1 AIPS 2: while (j<9) AIPS 2: keyword='CTYPE'!!char(j);gethead;keyword='CRVAL'!!char(j);cl rtemp AIPS 2: if (keystrng='FREQ') then;gethead;j=9;else;j=j+1;end;end AIPS 2: cellsize=1.75e10/(keyvalue(1)*abs(lsparm(5)));do3dimag=1;overl ap=2;vput AIPS 2: keyword'NUM ROW';inext'SU';invers=0;keystrng'';getthead;clrtem p AIPS 2: for i=1:keyvalue(1) $ check if source is in index and uvfile e xists AIPS 2: vget tabget;pixxy=i,2,0;tabget;vget imagr;inname=keystrng;j= 1;intype'UV' AIPS 2: inseq=0;chkname;type ' ';niter=lsparm(7);lstarg=1;clrtemp;vp ut AIPS 2: if (error < 1) then $ source file exists, but same source nu mber ? AIPS 2: vget tabget;pixxy=i,1,0;tabget;error=1;k=1 AIPS 2: while ((lssid(k)>0) & (k<1001)) AIPS 2: if (lssid(k)=keyvalue(1))then error=0;end AIPS 2: k=k+1;end;keyword'GCOUNT';gethead AIPS 2: if(keyvalue(1)<10)then;type'NO DATA';error=1;end;end;vget imagr AIPS 2: if (error < 1) then AIPS 2: if ((lsparm(7)=7e4)&(lsparm(8)<0))then;flux=6*calcrms;end AIPS 2: if ((lsparm(6)<0)!(lsparm(5)<0))then;setimsize;else;imsize =lsparm(6);end AIPS 2: while (j<30) AIPS 2: k=length(inname) AIPS 2: if (substr(lsallcal(j),1,k)=substr(inname,1,k)) then $ c alibrator AIPS 2: lstarg=0;j=30 AIPS 2: if(lsparm(6)>=-0.99)then;niter=min(500,lsparm(7)) AIPS 2: nfield=1;boxfile'';imsize=min(256,lsparm(6)) AIPS 2: if(imsize(1)<0)then;imsize=256;end;end AIPS 2: else;j=j+1;end $ check next source, if not found -> targ et AIPS 2: end;if(substr(boxfile,1,1)<>' ')then;catboxfile;end AIPS 2: AIPS 2: j=1 AIPS 2: $calibrator lstarg=0 AIPS 2: $target if lstarg=1 AIPS 2: AIPS 2: AIPS 2: while (j<9) AIPS 2: keyword='CTYPE'!!char(j);gethead;keyword='NAXIS'!!char(j );clrtemp AIPS 2: if (keystrng='IF') then;gethead;j=9;else;j=j+1;end;end AIPS 2: type ' NOW STARTING WITH SOURCE :'!!char(i)!!' ='!! inname;type ' ' AIPS 2: if (inclass='CH 0') then AIPS 2: for k=1:keyvalue(1);bif=k;eif=k AIPS 2: if ((lstarg>0)!(lsparm(9)>0)) then;go;end AIPS 2: end;clrtemp;k=keyvalue(1) AIPS 2: inclass'LINE';keyvalue=0;keystrng'';j=1;chkname AIPS 2: if (error < 1) then AIPS 2: while (j<9) AIPS 2: keyword='CTYPE'!!char(j);gethead;clrtemp AIPS 2: if (keystrng='FREQ') then AIPS 2: keyword='NAXIS'!!char(j);gethead;echan=keyvalue(1) ;j=9 AIPS 2: else;j=j+1;end AIPS 2: end;bchan=floor(echan/10);echan=ceil(echan*9/10) AIPS 2: if (bchan=1) then;bchan=2;end;j=k AIPS 2: for k=1:j;bif=k;eif=k;if ((lstarg>0)!(lsparm(9)>1)) then;go;end AIPS 2: end;end;clrtemp AIPS 2: else AIPS 2: bif=1;eif=keyvalue(1);vput;out2disk=indisk AIPS 2: if ( (lsparm(10)=0) ! ((lsparm(9)<1)&(lstarg<1)) )then;g o;clrtemp AIPS 2: else AIPS 2: solint=lsparm(2);dotv=1;nmaps=lsparm(10);refant=lsrant ;aparm=4,0 AIPS 2: if (lsparm(10)<0) then;dotv=-1;nmaps=-1*nmaps;end;go s cimg;clrtemp AIPS 2: end;end;boxfile=setboxfle;delboxfle AIPS 2: inclass'IMAGR';inseq=0;intype'UV';indisk=lsdisk;allzap AIPS 2: $ inclass'SCIMG';allzap AIPS 2: inclass'IBM*';intype'MA';allzap AIPS 2: inclass'RBM*';allzap;inclass'LBM*';allzap;recat;clrtemp AIPS 2: else;type ' NO UV-FILE, SKIPPING SOURCE :'!!inname!!' =#' !!char(i) AIPS 2: end;end;dowait=false;vnum=0 AIPS 2: finish AIPS 2: AIPS 2: procedure avlapipe AIPS 2: tput avlapipe;vnum=33;vput avlapipe;pipeinpt;clrtemp AIPS 2: if (lserr <> 0) then; type '*** ERROR - ARE ALL INPUTS SET PRO PERLY ? ***' AIPS 2: else;lsclrcal;tint=guesintt;clrtemp AIPS 2: if (tint > 0) then;calpipe(lsdisk,lsname,lsrant);clrtemp AIPS 2: if (lsparm(1)>0) then;imapipe(1,lsdisk,lsname) AIPS 2: else;type'CALIBRATION DONE - SKIPPING SPLIT AND IMAGING' AIPS 2: type'--------------------------------------------------- --------' AIPS 2: end;type ' ' AIPS 2: if (lsplot>0) then;type 'VIEW CAL-PLOTS WITH GETSET;ALLPLO T';end;type ' ' AIPS 2: else;type '* * *';type 'SINGLE DISH VLBI EXPERIMENT?';type ' * * *';end AIPS 2: end;tget avlapipe;vnum=0;type'* APPEARS TO HAVE ENDED SUCCESSF ULLY *';clrtemp AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: default'AVLAPIPE' AIPS 2: Found in Version=ABIN AIPS 2: indisk 1; doalign -1; flagver 2; domodel 1 AIPS 2: docal 1; sources '*''' AIPS 2: $ to be set by itself later AIPS 2: solint 1; factor 5; doarray -1; imsize -1 AIPS 2: $imsize 512;$niter -1;cutoff -1;plver 0 AIPS 2: niter -1; cutoff -1 AIPS 2: $ for now debugging AIPS 2: docont 1; plver -1; doall 1; doresid 0 AIPS 2: AIPS 2: $ defaults AIPS 2: $ BADDISK 0$ INDISK 0$ DOCAT 1$ INNAME ' '$ INCLASS ' '$ INSEQ 0 AIPS 2: $ DOALIGN 1$ FLAgver 0$ SOLINT 0$ FACTOR 0$ REFANT 0$ DOMODEL -1 AIPS 2: $ KEYSTRNG ' '$ FLUX 0$ UVRANGE 0, 0$ SOURCES ' '$ CALSOUR ' ' AIPS 2: $ dopol 0$ bpa 0$ DOCONT 1$ PLVER 0$ DOALL -1$ DOARRAY -1 AIPS 2: $ IMSIZE 0, 0$ NITER 0$ CUTOFF 0$ DOCAL 0$ DORESID -1 >>::::::>AIPS 2: 'AK485_2000MAR03_1' >>AIPS 2: 'AK485_2000MAR03_1' >AIPS 2: Found in Version=ABIN AIPS 2: $ Lorant Sjouwerman, versions 1.. 2005, for NRAO AIPS 2: AIPS 2: $$ General catalog looks like AIPS 2: $$ Multi-source UV data file AIPS 2: $$ Multi-source TASAV file AIPS 2: $$ Single-source calibrated data - auvf AIPS 2: $$ Single-source calibrated images- aimg AIPS 2: AIPS 2: $May need to redefine after a restore 0: AIPS 2: $allzap AIPS 2: $calcintt AIPS 2: $guesintt AIPS 2: $lsparm(5);tint;lsdisk AIPS 2: AIPS 2: procedure flatfov AIPS 2: $LOS - compile flatn-ed radius blank-ed images out to where pbco rr=2.5 (=xpb) AIPS 2: scalar uvi,mai,fov,frq,kk,tbw,tint,xpb,xcst,,fbw,fta;xpb=2.5 AIPS 2: clrname;indisk=lsdisk;intype'UV';chkname;uvi=1-error AIPS 2: if(uvi<3)then;type'ERROR: NO FILES PROCESSED !';else AIPS 2: if(uvi<4)then;type'WARNING: ONLY ONE UV-FILE - MAYBE CHECK?' ;end AIPS 2: egetname 1;tint=guesintt;xcst=sqrt((3/ln(2))*(xpb-1)/xpb);kk =1 AIPS 2: while (kk<7) AIPS 2: keyvalue=0;keystrng'';keyword='CTYPE'!!char(kk);gethead AIPS 2: if(substr(keystrng,1,4)='FREQ')then;keyword='CRVAL'!!char( kk) AIPS 2: keystrng'';gethead;frq=keyvalue(1);kk=10;else;kk=kk+1;en d;end AIPS 2: for i=3:uvi;egetname i AIPS 2: task'TABGET';inext'FQ';invers 1;keyword'NUM ROW';keystrng' ';getthead AIPS 2: for j=1:keyvalue(1) AIPS 2: pixxy=j,4,1;tabget;tbw=keyvalue(1) AIPS 2: pixxy=j,4,2;tabget;tbw=max(tbw,keyvalue(1)) AIPS 2: end;intype'MA';inseq=0;inclass'*001';chkname;mai=1-error AIPS 2: if(mai>1)then;type'WARNING: MULTIPLE IMAGES - CHECK?';end; inclass'NVAS06' AIPS 2: chkname;if(error<1)then;type inname!!' : FLATFOV ALREADY D ONE';mai=0;end AIPS 2: if (mai=1) then;inclass'*001' AIPS 2: for j=1:mai $ assume inseq starts at 1.. AIPS 2: inseq=j;kk=1;cellsize=0;userid=0 AIPS 2: while (kk<5) AIPS 2: keyvalue=0;keystrng'';keyword='CTYPE'!!char(kk);geth ead AIPS 2: keyword='CDELT'!!char(kk);clrtemp AIPS 2: if(substr(keystrng,1,3)='RA-')then;gethead;cellsize(1)=k eyvalue(1);end AIPS 2: if(substr(keystrng,1,4)='DEC-')then;gethead;cellsize(2)= keyvalue(1);end AIPS 2: if(substr(keystrng,1,4)='FREQ')then;keyword='CRVAL'!!cha r(kk) AIPS 2: keystrng'';gethead;fov=keyvalue(1)/1e9;fov=1350/fo v;end;kk=kk+1 AIPS 2: end;cellsize(1)=-1*cellsize(1)*3600;cellsize(2)=cellsi ze(2)*3600 AIPS 2: fta=min(1.75e10/(frq*abs(lsparm(5))),(min(cellsize(1), cellsize(2)))) AIPS 2: fbw=xcst*3*fta*frq/tbw $ radius field/view due bandwidth AIPS 2: fta=xcst*3*fta/(tint*7.2722e-5) $ radius field/view due averaging AIPS 2: fov=min(fov,fbw);fov=min(fov,fta) $ min field/view radius, arcsec AIPS 2: imsize(1)=ceil(2*fov/cellsize(1));imsize(2)=ceil(2*fov /cellsize(2)) AIPS 2: task'FLATN';inclass'?CL*';chkname;nfield=1-error;nmaps =1;clroname AIPS 2: outname=inname;coordina=0;reweight=0;doweight=0;edgskp =15;aparm=0 AIPS 2: pbparm=1/xpb,0;type'MINIMUM FOV :'!!char(fov)!!' ARCSE C RADIUS' AIPS 2: inclass'?CL001';gx AIPS 2: $inclass'?CL*';allzap;recat AIPS 2: ;inclass'FLATN' AIPS 2: tput;default blank;tget flatn;task'BLANK';opcode'RADI' ;dparm fov,0 AIPS 2: gx;allzap;recat AIPS 2: end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvasimage AIPS 2: $LOS - Determine noise, do primary beam correction, include copy right AIPS 2: scalar numfle,ll,mm AIPS 2: clrname;indisk=lsdisk;recat;chkname;numfle=1-error;mai=0 AIPS 2: while((mai'BLANK')) AIPS 2: mai=mai+1;egetname mai;end;if(inclass<>'BLANK')then;mai=numf le+1;end AIPS 2: for j=mai:numfle;default imean;docat=1;intype'SC';egetname j;c hkname AIPS 2: if(error=0)then;keyvalue=0;keystrng'';keyword='CRPIX1';gethe ad AIPS 2: ll=keyvalue(1);keyword='CRPIX2';gethead;mm=keyvalue(1);doinv ers=1 AIPS 2: blc(1)=ll-29;blc(2)=mm-30;trc(1)=ll+30;trc(2)=mm+29;imstat;d oinv=-1 AIPS 2: blc=0;trc=0;rms=pixstd;go;wa;if(pixstd=rms)then;keyword'ACTN OISE' AIPS 2: keytype'R';keyvalue=rms,0;puthead;end;end;end AIPS 2: default'PBCOR';indisk=lsdisk;inclass'BLANK';chkname;pbparm=1/x pb,0 AIPS 2: for j=mai:numfle AIPS 2: intype'SC';egetname mai;chkname;if(error=0)then;getoname mai AIPS 2: outclass'RADCOR';outseq=0;inclass'BLANK';outdisk=indisk;gx;z ap;recat;end AIPS 2: end;default'CPYRT';indisk=lsdisk;recat;infile='AVLA:Arch_Cprt AIPS 2: for j=mai:numfle $ can only do on MA files AIPS 2: intype'SC';egetname mai;chkname;getoname mai;outclass'NVAS06 '; AIPS 2: if(inclass='RADCOR')then;gx;inclass'RADCOR';zap;recat;end;en d AIPS 2: finish AIPS 2: AIPS 2: procedure mkarr AIPS 2: string*1 sx,lx,az AIPS 2: string*4 nnsl AIPS 2: scalar aw, ae, an, ai AIPS 2: numbant=0;aw=0;ae=0;an=0 AIPS 2: keyword'NUM ROW';inext'AN';invers=0;getthead;k=keyvalue(1) AIPS 2: for j=1:k AIPS 2: pixxy=j,1,0;tabget;i=1;clrtemp AIPS 2: while((substr(keystrng,i,i)<>':')&(i<9));i=i+1;end;clrtemp AIPS 2: if (substr(keystrng,i+1,i+1)<>' ')then;lsvla=substr(keystrng ,i+1,i+3) AIPS 2: else;lsvla=substr(keystrng,i+2,i+4);end;az=substr(lsvla,1,1) AIPS 2: if ((lsvla<>'OUT')&(lsvla<>'MPD'))then;numbant=numbant+1 AIPS 2: if (lsvla='VPT')then;ai=75;lx='P';else;ai=value(substr(lsv la,2,3)) AIPS 2: if(az='W')then;aw=max(aw,ai);else;if(az='E')then;ae=max( ae,ai);else AIPS 2: if(az='N')then;an=max(an,ai);else;if(lx<>'P')then; AIPS 2: type lsvla!!' - ERROR: ANTENNA NOT KNOWN';end;en d;end;end AIPS 2: clrtemp;end;end;end AIPS 2: if (lx<>'P')then;ai=max(aw,ae);ai=max(ai,an);lx='D';if(ai>36)t hen;lx='A' AIPS 2: else;if(ai>18)then;lx='B';else;if(ai>9)then;lx='C';end;end ;end;end AIPS 2: ai=min(aw,ae);ai=min(ai,an);sx='A';if(ai<10)then;sx='D';else;i f(ai<19)then AIPS 2: sx='C';else;if(ai<37)then;sx='B';end;end;end;clrtemp AIPS 2: if(numbant<10)then AIPS 2: nnsl='0'!!char(numbant)!!sx!!lx;else;nnsl=char(numbant)!!sx! !lx;end AIPS 2: return nnsl AIPS 2: finish AIPS 2: AIPS 2: procedure nvasname AIPS 2: $LOS - makes the RA/Dec directory and returns the archive file n ame AIPS 2: scalar ki,ra1,ra2,dc1,dc2,rh,rm,rs,dd,dm,ds,rmsv,sbmv AIPS 2: scalar ifx,nif,nu,nu1,nu2,bw,nst,stv,msuv1,msuv2,msuv AIPS 2: string*1 pm,rmsc,stc,ik,rdi AIPS 2: string*2 zz AIPS 2: string*3 mmm AIPS 2: string*4 rmss,sbms,fras,frqs,nnsl,rads AIPS 2: string*30 dir AIPS 2: string*20 expnm AIPS 2: expnm = '' AIPS 2: if(expnm='')then AIPS 2: keyword'OBSERVER';gethead;expnm=keystrng;keyword'DATE-OBS';g ethead AIPS 2: mmm=substr(keystrng,5,6) AIPS 2: if(mmm='01')then;mmm='JAN';end;if(mmm='02')then;mmm='FEB';en d AIPS 2: if(mmm='03')then;mmm='MAR';end;if(mmm='04')then;mmm='APR';en d AIPS 2: if(mmm='05')then;mmm='MAY';end;if(mmm='06')then;mmm='JUN';en d AIPS 2: if(mmm='07')then;mmm='JUL';end;if(mmm='08')then;mmm='AUG';en d AIPS 2: if(mmm='09')then;mmm='SEP';end;if(mmm='10')then;mmm='OCT';en d AIPS 2: if(mmm='11')then;mmm='NOV';end;if(mmm='12')then;mmm='DEC';en d AIPS 2: expnm=expnm!!'_'!!substr(keystrng,1,4)!!mmm!!substr(keystrng ,7,8)!!'_1' AIPS 2: end;ki=1;userid=0 AIPS 2: while (ki<9) AIPS 2: ik=char(ki);keyvalue=0;keystrng'';keyword='CTYPE'!!ik;gethea d;clrtemp AIPS 2: if(substr(keystrng,1,2)='RA')then AIPS 2: keyword='CRVAL'!!ik;gethead;ra1=keyvalue(1);ra2=keyvalue(2 );msuv1=ra1+ra2 AIPS 2: keyword='CDELT'!!ik;gethead;cellsize(1)=-1*keyvalue(1)*360 0;ra1=ra1/15 AIPS 2: ra2=ra2/15;rh=floor(ra1);ra1=(ra1-rh)*60;rm=floor(ra1);ra1 =(ra1-rm)*60 AIPS 2: rs=((floor((ra1+(3600*ra2))*1000)+0.005)/1000);clrtemp AIPS 2: if(abs(rs-floor(rs))<0.1)then;zz='.0';else;zz='';end;clrte mp AIPS 2: keyword='NAXIS'!!ik;gethead;ra1=0.5*keyvalue(1)*cellsize(1 );end AIPS 2: if(substr(keystrng,1,3)='DEC')then AIPS 2: keyword='CRVAL'!!ik;gethead;dc1=keyvalue(1);dc2=keyvalue(2) ;msuv1=dc1+dc2 AIPS 2: keyword='CDELT'!!ik;gethead;cellsize(2)=keyvalue(1)*3600 AIPS 2: if(dc1<0)then;pm='-';dc1=-1*dc1;dc2=-1*dc2;else;pm='+';end AIPS 2: dd=floor(dc1);dc1=(dc1-dd)*60;dm=floor(dc1);dc1=(dc1-dm)*6 0 AIPS 2: ds=floor(dc1+(3600*dc2)+0.0005);clrtemp;keyword='NAXIS'!!i k AIPS 2: gethead;dc1=0.5*(keyvalue(1)-10)*cellsize(2);end $ie corre ct for (c)-top AIPS 2: if(substr(keystrng,1,2)='IF')then AIPS 2: keyword='NAXIS'!!ik;gethead;nif=keyvalue(1);clrtemp;end AIPS 2: if(substr(keystrng,1,4)='FREQ')then AIPS 2: keyword='CRVAL'!!ik;gethead;nu1=keyvalue(1)/1e6;nu2=keyval ue(2)/1e6 AIPS 2: keyword='CDELT'!!ik;gethead;bw=keyvalue(1)/1e6;end;nu=(nu1 +nu2);clrtemp AIPS 2: if(substr(keystrng,1,6)='STOKES')then AIPS 2: keyword='CRVAL'!!ik;gethead;stv=keyvalue(1) AIPS 2: keyword='NAXIS'!!ik;gethead;nst=keyvalue(1);clrtemp AIPS 2: if(nst=4)then;stc='F';else;if(nst=2)then;stc='H';else;if(s tv=-1)then AIPS 2: stc='R';else;if(stv=-2)then;stc='L';else;if(stv=-5)t hen;stc='X' AIPS 2: else;if(stv=-6)then;stc='Y';else;if(stv >0)then;st c='I';else AIPS 2: stc='U';end;end;end;end;end;end;end;end AIPS 2: if(substr(keystrng,1,1)='')then;ki=10;else;ki=ki+1;end AIPS 2: end;clrtemp $ build the output file name here AIPS 2: if(intype='UV')then;nu1=0;nu2=0;clrtemp;inext'FQ';for ifx=1:ni f AIPS 2: pixxy=1,2,ifx;tabget;nu1=nu1+((keyvalue(1)+keyvalue(2))/1e 6) AIPS 2: pixxy=1,3,ifx;tabget;nu2=nu2+((keyvalue(1)+keyvalue(2))/1e 6);end AIPS 2: nu=nu+0.5*(nu1+(0.5*nu2));clrtemp;else;if(intype='MA')then; AIPS 2: fras=substr(char(0.5*(ra1+dc1)),1,4);nu=nu+(bw/(2*nif));el se AIPS 2: type 'ERROR: FILE TYPE UNKNOWN (HOW DID THIS HAPPEN?)';end ;end AIPS 2: frqs=substr(char((nu+5)/1000),1,4);clrtemp;sys2com(1)=' $aimg/ AIPS 2: if (intype='MA')then; $read conv size,rms from header, use ims i*cell/2 for R AIPS 2: rdi='S';ra2=0.5*(ra1+dc1-9);if(ra2>60)then;rdi='M';ra2=ra2/60 ;end $ R-fov AIPS 2: if(ra2>60)then;rdi='D';ra2=ra2/60;end;rads=substr(char(ra2), 1,4) AIPS 2: keyword='BMAJ';gethead;sbmv=keyvalue(1);keyword='BMIN';gethe ad AIPS 2: sbmv=1800*(sbmv+keyvalue(1));sbms=substr(char(sbmv),1,4) AIPS 2: AIPS 2: keyvalue=0;keystrng'';keyword='ACTNOISE';gethead;rmsv=keyvalu e(1) $ RMS<1e4 AIPS 2: if(rmsv>1)then;rmsc='J';rmss=substr(char(rmsv),1,4);else;rms v=rmsv*1000 AIPS 2: if(rmsv>1)then;rmsc='M';rmss=substr(char(rmsv),1,4);else;r msv=rmsv*1000 AIPS 2: if(rmsv>1)then;rmsc='U';rmss=substr(char(rmsv),1,4);else AIPS 2: rmsv=rmsv*1000;rmsc='N';rmss=substr(char(rmsv),1,4) AIPS 2: end;end;end;clrtemp;fras='';while(length(frqs)<4);frqs=frqs! !'0';end AIPS 2: while(length(rads)<4);rads=rads!!'0';end;while(length(rmss)< 4) AIPS 2: rmss=rmss!!'0';end;while(length(sbms)<4);sbms=sbms!!'0';en d AIPS 2: outfile=frqs!!stc!!sbms!!'_'!!expnm!!'_'!!rmss!!rmsc!!fras!! rads!!rdi AIPS 2: else;outfile=frqs!!stc!!nnsl!!'_'!!expnm!!'.uvfits AIPS 2: end AIPS 2: msuv=(sqrt((msuv1*msuv1)+(msuv2*msuv2)))*3600 AIPS 2: if(msuv>5)then $ not multisource UV, make a source dir AIPS 2: dir='';sysout'';syscom'mkdir AIPS 2: if(rh<10)then;sys2com(2)='J0'!!char(rh);else;sys2com(2)='J'! ! char(rh);end AIPS 2: if(rm<10)then;sys2com(3)='0'!!char(rm);else;sys2com(3)=char( rm);end AIPS 2: if(rs<10)then;sys2com(4)='0'!!char(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' STARTPMON: [HAMAL] Too many TPMON daemons possibly found???? STARTPMON: [HAMAL] Expected 1, found 3. STARTPMON: [HAMAL] Please inform the AIPS Manager. QUACK2: Task QUACK (release of 31DEC06) begins QUACK2: Flagged 1.50 min. of data in 6 scans QUACK2: Appears to have ended successfully QUACK2: hamal 31DEC06 TST: Cpu= 0.0 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes FLAGR2: Task FLAGR (release of 31DEC06) begins FLAGR2: Copied FG file from vol/cno/vers 1 1 1 to 1 1 2 FLAGR2: Overall average amp= 6.325E-01 +- 1.936E-02 source= 0137+331 FLAGR2: Overall average rms= 2.446E-03 +- 3.703E-04 source= 0137+331 FLAGR2: Overall average amp= 5.430E-02 +- 7.720E-04 source= 0019+734 FLAGR2: Overall average rms= 2.260E-03 +- 2.989E-04 source= 0019+734 FLAGR2: Overall average amp= 3.293E-03 +- 4.704E-04 source= G000301A FLAGR2: Overall average rms= 1.489E-03 +- 1.584E-04 source= G000301A FLAGR2: Found 0 bad times, 4 total flags FLAGR2: Wrote 0 antenna & IF independent flags FLAGR2: Wrote 0 antenna independent, IF dependent flags FLAGR2: Wrote 4 antenna & IF dependent flags FLAGR2: Wrote 0 antenna & IF dependent, all-times flags FLAGR2: Appears to have ended successfully FLAGR2: hamal 31DEC06 TST: Cpu= 1.7 Real= 2 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes SETJY2: Task SETJY (release of 31DEC06) begins SETJY2: / Resetting flux information to zero SETJY2: BIF = 1 EIF = 2 /Range of IFs SETJY2: SOURCES = '' /All sources selected SETJY2: Appears to have ended successfully SETJY2: hamal 31DEC06 TST: Cpu= 0.0 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes SETJY2: Task SETJY (release of 31DEC06) begins SETJY2: A source model for this calibrator may be available SETJY2: Use the verb CALDIR to see if there is one SETJY2: A source model for this calibrator may be available SETJY2: Use the verb CALDIR to see if there is one SETJY2: / Flux calculated using known spectrum SETJY2: BIF = 1 EIF = 2 /Range of IFs SETJY2: '0137+331 ' IF = 1 FLUX = 5.4054 (Jy calcd) SETJY2: '0137+331 ' IF = 2 FLUX = 5.4585 (Jy calcd) SETJY2: / Using (1999.2) VLA or Reynolds (1934-638) coefficients SETJY2: Appears to have ended successfully SETJY2: hamal 31DEC06 TST: Cpu= 0.0 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes CALIB2: Task CALIB (release of 31DEC06) begins CALIB2: CALIB USING 20000303 . C BAND . 1 DISK= 1 USID=**** CALIB2: L1 Solution type CALIB2: Selecting, editing and calibrating the data CALIB2: Doing cal transfer mode with point model for each source CALIB2: This is not self-calibration CALIB2: Dividing data by source flux densities CALIB2: Determining solutions CALIB2: Writing SN table 1 CALIB2: Found 508 good solutions CALIB2: Average closure rms = 0.0140 +- 0.0076 CALIB2: Fraction of times having data > 2.5 rms from solution CALIB2: 0.35000 of the times had 0 - 2 percent outside 2.5 times rms CALIB2: 0.45000 of the times had 2 - 4 percent outside 2.5 times rms CALIB2: 0.15000 of the times had 6 - 8 percent outside 2.5 times rms CALIB2: 0.05000 of the times had 8 - 10 percent outside 2.5 times rms CALIB2: Adjusting solutions to a common reference antenna CALIB2: Appears to have ended successfully CALIB2: hamal 31DEC06 TST: Cpu= 0.2 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: '0137+331 MODEL =' '3C48_C' AIPS 2: SYSTEM command to be executed is: AIPS 2: ls -1 $AIPSTARS/3C48_C.MODEL >& /dev/null CALRD2: Task CALRD (release of 31DEC06) begins CALRD2: Reading disk file AIPSTARS:3C48_C.MODEL CALRD2: Create 3C48_C .MODEL . 1 (MA) on disk 1 cno 2 CALRD2: Appears to have ended successfully CALRD2: hamal 31DEC06 TST: Cpu= 0.0 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: '0137+331 MODEL =' '3C48_C' AIPS 2: SYSTEM command to be executed is: AIPS 2: ls -1 $AIPSTARS/3C48_C.MODEL >& /dev/null AIPS 2: Resumes CALIB2: Task CALIB (release of 31DEC06) begins CALIB2: CALIB USING 20000303 . C BAND . 1 DISK= 1 USID=**** CALIB2: L1 Solution type CALIB2: Selecting, editing and calibrating the data CALIB2: Doing self-cal mode with CC model CALIB2: SETGDS: imaging done with reprojected tangent point(s) CALIB2: FACSET: source model will be scaled to 5.405 Jy CALIB2: FACSET: 5.813153 Jy found from 196 components CALIB2: FACSET: scaling factor set to 9.29865E-01 CALIB2: VISDFT: Begin DFT component division CALIB2: VISDFT: Model components of type Point CALIB2: I Polarization model processed CALIB2: Model computation is 60 percent complete CALIB2: Model computation is 90 percent complete CALIB2: FACSET: source model will be scaled to 5.458 Jy CALIB2: FACSET: 5.813153 Jy found from 196 components CALIB2: FACSET: scaling factor set to 9.38986E-01 CALIB2: VISDFT: Begin DFT component division CALIB2: I Polarization model processed CALIB2: Field 1 used 196 CCs CALIB2: Determining solutions CALIB2: Deleted 50 records from SN table no. 1 CALIB2: Writing SN table 1 CALIB2: Found 200 good solutions CALIB2: Average closure rms = 0.0028 +- 0.0002 CALIB2: Fraction of times having data > 2.5 rms from solution CALIB2: 0.12500 of the times had 0 - 2 percent outside 2.5 times rms CALIB2: 0.50000 of the times had 2 - 4 percent outside 2.5 times rms CALIB2: 0.37500 of the times had 4 - 6 percent outside 2.5 times rms CALIB2: Adjusting solutions to a common reference antenna CALIB2: Appears to have ended successfully CALIB2: hamal 31DEC06 TST: Cpu= 0.7 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: '0137+331 MODEL =' '3C48_C' AIPS 2: SYSTEM command to be executed is: AIPS 2: ls -1 $AIPSTARS/3C48_C.MODEL >& /dev/null AIPS 2: Resumes AIPS 2: Resumes CLCAL2: Task CLCAL (release of 31DEC06) begins CLCAL2: Using interpolation mode 2PT CLCAL2: Processing SN table 1 CLCAL2: Adjusting solutions to a common reference antenna = 27 CLCAL2: SNMRG: Merging SN table CLCAL2: SNMRG: Write 127 merged records from 127 input records CLCAL2: SN2CL: Applying SN tables to CL table 1, writing CL table 2 CLCAL2: Appears to have ended successfully CLCAL2: hamal 31DEC06 TST: Cpu= 0.2 Real= 1 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: '0137+331 MODEL =' '3C48_C' AIPS 2: SYSTEM command to be executed is: AIPS 2: ls -1 $AIPSTARS/3C48_C.MODEL >& /dev/null AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes CLCAL2: Task CLCAL (release of 31DEC06) begins CLCAL2: Using interpolation mode SELF CLCAL2: Deleted 494 records from CL table no. 2 CLCAL2: Processing SN table 1 CLCAL2: WARNING: SN table 1 has already been applied CLCAL2: Adjusting solutions to a common reference antenna = 27 CLCAL2: SNMRG: Merging SN table CLCAL2: SNMRG: Write 127 merged records from 127 input records CLCAL2: SN2CL: Applying SN tables to CL table 1, writing CL table 2 CLCAL2: Appears to have ended successfully CLCAL2: hamal 31DEC06 TST: Cpu= 0.3 Real= 0 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: '0137+331 MODEL =' '3C48_C' AIPS 2: SYSTEM command to be executed is: AIPS 2: ls -1 $AIPSTARS/3C48_C.MODEL >& /dev/null AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes CALIB2: Task CALIB (release of 31DEC06) begins CALIB2: CALIB USING 20000303 . C BAND . 1 DISK= 1 USID=**** CALIB2: L1 Solution type CALIB2: Selecting, editing and calibrating the data CALIB2: Doing cal transfer mode with point model for each source CALIB2: This is not self-calibration CALIB2: Dividing data by source flux densities CALIB2: Determining solutions CALIB2: Writing SN table 2 CALIB2: RPOL, IF= 1 The average gain over these antennas is 4.040E+00 CALIB2: RPOL, IF= 2 The average gain over these antennas is 4.043E+00 CALIB2: LPOL, IF= 1 The average gain over these antennas is 4.035E+00 CALIB2: LPOL, IF= 2 The average gain over these antennas is 4.038E+00 CALIB2: Found 408 good solutions CALIB2: Average closure rms = 0.0015 +- 0.0003 CALIB2: Fraction of times having data > 2.5 rms from solution CALIB2: 0.26316 of the times had 0 - 2 percent outside 2.5 times rms CALIB2: 0.15789 of the times had 2 - 4 percent outside 2.5 times rms CALIB2: 0.10526 of the times had 4 - 6 percent outside 2.5 times rms CALIB2: 0.15789 of the times had 6 - 8 percent outside 2.5 times rms CALIB2: Adjusting solutions to a common reference antenna CALIB2: Appears to have ended successfully CALIB2: hamal 31DEC06 TST: Cpu= 0.6 Real= 1 ar(rs)!!zz;else;sys2com(4)=ch ar(rs)!!zz;end AIPS 2: sys2com(4)=substr(sys2com(4),1,4);clrtemp AIPS 2: if(dd<10)then;sys2com(5)=pm!!'0'!!char(dd);else;sys2com(5)=pm !!char(dd);end AIPS 2: if(dm<10)then;sys2com(6)='0'!!char(dm);else;sys2com(6)=char( dm);end AIPS 2: if(ds<10)then;sys2com(7)='0'!!char(ds);else;sys2com(7)=char( ds);end AIPS 2: sys2com(7)=substr(sys2com(7),1,2);clrtemp AIPS 2: sys2com(8) ' >& /dev/null AIPS 2: system;clrtemp;for i=1:7;dir=dir!!sys2com(i);end;ki=length(di r) $must be 23 AIPS 2: dir=substr(dir,8,ki);if(ki<>23)then;type'OOPS: WRONG DIRECTO RY NAME ?';end AIPS 2: end;syscom'';sys2com'';clrtemp AIPS 2: return AIPS 2: finish AIPS 2: AIPS 2: procedure nvasarch AIPS 2: $LOS - archives the files to disk - define $EXP (and $AVLA/$ADAT /$AIMG/$AUVF) AIPS 2: string*4 nnsl AIPS 2: string*20 expnm AIPS 2: string*64 expfile AIPS 2: scalar nn,mai,uvi,xe,nif AIPS 2: clrname;indisk=lsdisk;chkname;numfle=1-error;intype'UV';chknam e;uvi=1-error AIPS 2: default fitab;indisk=lsdisk;recat;douvcomp=-1;nif=2;type expid AIPS 2: $2IF IM, or reset in uv#1 AIPS 2: if(numfle>3)then $ at least 1UVF, 1TSV, 1SS, 1MA AIPS 2: egetname 1;nnsl=mkarr;nvasname;i=1;clrtemp;syscom'mkdir AIPS 2: while((substr(expnm,i,i)<>'_')&(i<21));i=i+1;end;dir=substr( expnm,1,i-1) AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.uvfits AIPS 2: sysout'';sys2com'';sys2com(2) ' >& /dev/null AIPS 2: sys2com(1)' $ADAT/'!!dir;system;gx;clrtemp;egetname 2;clrtemp ;syscom'\mv -f AIPS 2: outfile='ADAT:'!!expnm!!'_'!!frqs!!stc!!nnsl!!'.clfits AIPS 2: gx;sys2com(1)' $ADAT/'!!expnm!!'_* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ADAT/'!!expnm!!'.* $ADAT/'!!dir;system AIPS 2: sys2com(1)' $ARUN/'!!expnm!!'.* $ADAT/'!!dir;system;j=2;mai= 0 AIPS 2: while(j& /de v/null AIPS 2: outfile='AIMG:'!!outfile;if(xe=1)then;gx;end;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=substr(outfile,6,length(outfile))!!' $aimg/ AIPS 2: sys2com(2)=dir;system;clrtemp;end;for nn=(uvi+1):numfle $ archive MAps AIPS 2: egetname nn;chkname;xe=1-error;if((intype='MA')&(inclass=' NVAS06'))then AIPS 2: nvasname;sysout'';sys2com'';sys2com(8) ' >& /dev/null AIPS 2: expfile=outfile;outfile='AIMG:'!!outfile AIPS 2: if(xe=1)then;gx;syscom'\mv -f $aimg/ AIPS 2: sys2com(1)=expfile!!' $aimg/ AIPS 2: sys2com(2)=expfile!!'.imfits AIPS 2: system;clrtemp;syscom'fits2jpeg -nonLinear -fits $aimg/ AIPS 2: sys2com(1)=expfile!!'.imfits -jpeg $aimg/ AIPS 2: sys2com(2)=expfile!!'.jpg ; convert $aimg/ AIPS 2: sys2com(3)=expfile!!'.jpg AIPS 2: sys2com(4)=' -resize 150x150 -gamma 1.5 -depth 32 $aimg/ AIPS 2: sys2com(5)=expfile!!'.JPG'!!' ; \mv -f $aimg/ AIPS 2: sys2com(6)=expfile!!'* $aimg/ AIPS 2: sys2com(7)=dir;system;clrtemp;end;end;end;end AIPS 2: finish AIPS 2: AIPS 2: procedure nvas AIPS 2: typ expid;flatfov;if(uvi>3)then;nvasimage;nvasarch AIPS 2: end AIPS 2: AIPS 2: finish >AIPS 2: Found in Version=ABIN AIPS 2: Found in Version=ABIN AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'AIPS WILL CHOOSE THE REFERENCE ANTENNA' AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: 'SETFC WILL DETERMINE THE CELL SIZE' AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)' AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: '0137+331 MODEL =' '3C48_C' AIPS 2: SYSTEM command to be executed is: AIPS 2: ls -1 $AIPSTARS/3C48_C.MODEL >& /dev/null AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes CALIB2: Task CALIB (release of 31DEC06) begins CALIB2: CALIB USING 20000303 . C BAND . 1 DISK= 1 USID=**** CALIB2: L1 Solution type CALIB2: Selecting, editing and calibrating the data CALIB2: Doing self-cal mode with CC model CALIB2: SETGDS: imaging done with reprojected tangent point(s) CALIB2: FACSET: source model will be scaled to 5.405 Jy CALIB2: FACSET: 5.813153 Jy found from 196 components CALIB2: FACSET: scaling factor set to 9.29865E-01 CALIB2: VISDFT: Begin DFT component division CALIB2: VISDFT: Model components of type Point CALIB2: I Polarization model processed CALIB2: Model computation is 60 percent complete CALIB2: Model computation is 90 percent complete CALIB2: FACSET: source model will be scaled to 5.458 Jy CALIB2: FACSET: 5.813153 Jy found from 196 components CALIB2: FACSET: scaling factor set to 9.38986E-01 CALIB2: VISDFT: Begin DFT component division CALIB2: I Polarization model processed CALIB2: Field 1 used 196 CCs CALIB2: Determining solutions CALIB2: Deleted 25 records from SN table no. 2 CALIB2: Writing SN table 2 CALIB2: RPOL, IF= 1 The average gain over these antennas is 2.899E+00 CALIB2: RPOL, IF= 2 The average gain over these antennas is 2.905E+00 CALIB2: LPOL, IF= 1 The average gain over these antennas is 2.914E+00 CALIB2: LPOL, IF= 2 The average gain over these antennas is 2.917E+00 CALIB2: Found 100 good solutions CALIB2: Average closure rms = 0.0006 +- 0.0000 CALIB2: Fraction of times having data > 2.5 rms from solution CALIB2: 0.25000 of the times had 2 - 4 percent outside 2.5 times rms CALIB2: 0.75000 of the times had 4 - 6 percent outside 2.5 times rms CALIB2: Adjusting solutions to a common reference antenna CALIB2: Appears to have ended successfully CALIB2: hamal 31DEC06 TST: Cpu= 0.8 Real= 1 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 GETJY2: Task GETJY (release of 31DEC06) begins GETJY2: Source:Qual CALCODE IF Flux (Jy) GETJY2: 0019+734 : 0 A 1 0.43948 +/- 0.00092 GETJY2: 2 0.44002 +/- 0.00083 GETJY2: Appears to have ended successfully GETJY2: hamal 31DEC06 TST: Cpu= 0.0 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes CLCAL2: Task CLCAL (release of 31DEC06) begins CLCAL2: Using interpolation mode 2PT CLCAL2: Processing SN table 2 CLCAL2: Adjusting solutions to a common reference antenna = 27 CLCAL2: SNMRG: Merging SN table CLCAL2: SNMRG: Write 102 merged records from 102 input records CLCAL2: SN2CL: Applying SN tables to CL table 2, writing CL table 3 CLCAL2: Appears to have ended successfully CLCAL2: hamal 31DEC06 TST: Cpu= 0.2 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes CLCAL2: Task CLCAL (release of 31DEC06) begins CLCAL2: Using interpolation mode SELF CLCAL2: Deleted 475 records from CL table no. 3 CLCAL2: Processing SN table 2 CLCAL2: WARNING: SN table 2 has already been applied CLCAL2: Adjusting solutions to a common reference antenna = 27 CLCAL2: SNMRG: Merging SN table CLCAL2: SNMRG: Write 102 merged records from 102 input records CLCAL2: SN2CL: Applying SN tables to CL table 2, writing CL table 3 CLCAL2: Appears to have ended successfully CLCAL2: hamal 31DEC06 TST: Cpu= 0.3 Real= 1 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes TASAV2: Task TASAV (release of 31DEC06) begins TASAV2: Create 20000303 .TASAV . 1 (UV) on disk 1 cno 2 TASAV2: Copied AN file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied NX file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied SU file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied FQ file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied CL file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied CL file from vol/cno/vers 1 1 2 to 1 2 2 TASAV2: Copied CL file from vol/cno/vers 1 1 3 to 1 2 3 TASAV2: Copied TY file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied WX file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied OF file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied FG file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied FG file from vol/cno/vers 1 1 2 to 1 2 2 TASAV2: Copied XX file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied SN file from vol/cno/vers 1 1 1 to 1 2 1 TASAV2: Copied SN file from vol/cno/vers 1 1 2 to 1 2 2 TASAV2: Appears to have ended successfully TASAV2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes SPLIT2: Task SPLIT (release of 31DEC06) begins SPLIT2: You are using a non-standard program SPLIT2: Doing subarray 1 SPLIT2: Create 0137+331 .C BAND. 1 (UV) on disk 1 cno 3 SPLIT2: Applying CL Table version 3 SPLIT2: Previously flagged flagged by gain kept SPLIT2: Partially 0 0 0 SPLIT2: Fully 0 0 4500 SPLIT2: Copied AN file from vol/cno/vers 1 1 1 to 1 3 1 SPLIT2: Copied WX file from vol/cno/vers 1 1 1 to 1 3 1 SPLIT2: Copied OF file from vol/cno/vers 1 1 1 to 1 3 1 SPLIT2: Copied XX file from vol/cno/vers 1 1 1 to 1 3 1 SPLIT2: Create 0019+734 .C BAND. 1 (UV) on disk 1 cno 4 SPLIT2: Previously flagged flagged by gain kept SPLIT2: Partially 208 0 208 SPLIT2: Fully 0 0 6117 SPLIT2: Copied AN file from vol/cno/vers 1 1 1 to 1 4 1 SPLIT2: Copied WX file from vol/cno/vers 1 1 1 to 1 4 1 SPLIT2: Copied OF file from vol/cno/vers 1 1 1 to 1 4 1 SPLIT2: Copied XX file from vol/cno/vers 1 1 1 to 1 4 1 SPLIT2: Create G000301A .C BAND. 1 (UV) on disk 1 cno 5 SPLIT2: Previously flagged flagged by gain kept SPLIT2: Partially 50 0 50 SPLIT2: Fully 0 0 33375 SPLIT2: Copied AN file from vol/cno/vers 1 1 1 to 1 5 1 SPLIT2: Copied WX file from vol/cno/vers 1 1 1 to 1 5 1 SPLIT2: Copied OF file from vol/cno/vers 1 1 1 to 1 5 1 SPLIT2: Copied XX file from vol/cno/vers 1 1 1 to 1 5 1 SPLIT2: Appears to have ended successfully SPLIT2: hamal 31DEC06 TST: Cpu= 0.3 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN SETFC2: Task SETFC (release of 31DEC06) begins SETFC2: Found 0137+331 C BAND Seq 1 Disk: 1 in slot 3 SETFC2: SETCEL: recommends IMSIZE 906 CELLSIZE 0.60978 SETFC2: SETCEL: returns IMSIZE 1024 CELLSIZE 0.60978 SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /tmp/SETFC@0137+331_C,BAND.0-1 SETFC2: FLYEYE added 1 fields to BOXFILE to 0.000 deg SETFC2: WARNING: THIS MAY NOT COVER THE DESIRED AREA SETFC2: First field number written was 1 SETFC2: Highest field number written was 1 SETFC2: returns adverbs to AIPS SETFC2: Appears to have ended successfully SETFC2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN SETFC2: Task SETFC (release of 31DEC06) begins SETFC2: Found 0137+331 C BAND Seq 1 Disk: 1 in slot 3 SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /tmp/SETFC@0137+331_C,BAND.0-1 SETFC2: Searching catalog between 0.05 and 0.23 degrees radius SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /home/auto/aips/TEXT/STARS/NV00.0030 SETFC2: No NVSS sources selected for BOXFILE SETFC2: The Sun is 54.6 deg away - ignoring SETFC2: First field number written was 2 SETFC2: Highest field number written was 1 SETFC2: returns adverbs to AIPS SETFC2: Appears to have ended successfully SETFC2: hamal 31DEC06 TST: Cpu= 0.2 Real= 0 C 1 1012 1012 01 37 41.30 33 09 35.1 00001 -1 507 512 513 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' IMAGR2: Task IMAGR (release of 31DEC06) begins IMAGR2: ZTXOP2: using translated file name = IMAGR2: ZTXOP2: /tmp/SETFC@0137+331_C,BAND.0-1 IMAGR2: FIELDF: Final field parameters and # read are: IMAGR2: Field 1 1012 1012 6.2786E-03 -3.4000E-02 0 IMAGR2: ZTXOP2: using translated file name = IMAGR2: ZTXOP2: /tmp/SETFC@0137+331_C,BAND.0-1 IMAGR2: WINDF: Number of clean boxes/field read as follows: IMAGR2: Field 01: 1 IMAGR2: Create 0137+331 .IMAGR . 1 (UV) on disk 1 cno 6 IMAGR2: Beginning channel 1 through 1 with 2 IFs IMAGR2: IMACPY: Copied 4500 visibilities to be imaged IMAGR2: **** WARNING data included out of inner portion of UV plane **** IMAGR2: **** Watch for high-frequency & other poor cleaning effects **** IMAGR2: UVWAIT: begin finding uniform weights IMAGR2: UVWAIT: Average grid weight 2.993E+04 IMAGR2: UVWAIT: Adding temperance S 5.986E+03 IMAGR2: UVWAIT: begin applying uniform or other weights IMAGR2: UVWAIT: Sum of weights in 1.461E+07 and out 1.788E+07 IMAGR2: UVWAIT: Noise is increased by a factor 1.117 due to weighting IMAGR2: UVWAIT: Average summed weight 2.993E+04 over 9000 vis IMAGR2: Create 0137+331 .IBM001. 1 (MA) on disk 1 cno 7 IMAGR2: Create 0137+331 .ICL001. 1 (MA) on disk 1 cno 8 IMAGR2: GRDFLT: X and Y convolution type = SPHEROIDAL IMAGR2: GRDFLT: X and Y parms = 3.0000 1.0000 IMAGR2: GRDFLT: convolution function sampled every 1/100 of a cell IMAGR2: GRDMEM: Ave 2 Channels; 4.885100E+09 to 4.835100E+09 Hz IMAGR2: Field 1 Sum of gridding weights = 1.89835E+08 IMAGR2: Field 1 Beam min = -137.6 MilliJy, max = 1.0 Jy IMAGR2: Field 1 fit FWHM = 4.417 x 1.515 arcsec, PA= -83.7 IMAGR2: CLBHIS: minimum component 0.500 of current peak IMAGR2: Field 1 min = -551.3 MilliJy,max = 5.1 Jy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 964.74 MilliJy IMAGR2: 1365 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 3.043 Jy iter= 6 IMAGR2: Total Cleaned flux density = 2.376 Jy 6 comps IMAGR2: SETDO3: imaging done with multiple tangent planes IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: VISDFT: Model components of type Point IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -332.5 MilliJy,max = 2.8 Jy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 580.16 MilliJy IMAGR2: 1143 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.270 Jy iter= 16 IMAGR2: Total Cleaned flux density = 4.321 Jy 16 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -193.3 MilliJy,max = 1.2 Jy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 242.13 MilliJy IMAGR2: 1304 Residual map points loaded IMAGR2: Field 1 min allowed flux = 541.835 MilliJy iter= 26 IMAGR2: Total Cleaned flux density = 5.143 Jy 26 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -141.8 MilliJy,max = 504.2 MilliJy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 103.30 MilliJy IMAGR2: 2010 Residual map points loaded IMAGR2: Field 1 min allowed flux = 231.507 MilliJy iter= 36 IMAGR2: Total Cleaned flux density = 5.495 Jy 36 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -168.1 MilliJy,max = 217.1 MilliJy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 44.14 MilliJy IMAGR2: 15784 Residual map points loaded IMAGR2: Field 1 min allowed flux = -107.621 MilliJy iter= 67 IMAGR2: Total Cleaned flux density = 5.501 Jy 67 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -106.7 MilliJy,max = 106.9 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 34.89 MilliJy IMAGR2: 8677 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -58.253 MilliJy iter= 122 IMAGR2: Total Cleaned flux density = 5.445 Jy 122 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -57.6 MilliJy,max = 57.8 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 18.89 MilliJy IMAGR2: 16195 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -29.044 MilliJy iter= 196 IMAGR2: Total Cleaned flux density = 5.447 Jy 196 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -28.7 MilliJy,max = 28.2 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 12.10 MilliJy IMAGR2: 17344 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 18.992 MilliJy iter= 340 IMAGR2: Total Cleaned flux density = 5.466 Jy 340 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -18.4 MilliJy,max = 16.0 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 7.91 MilliJy IMAGR2: 17826 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -11.342 MilliJy iter= 513 IMAGR2: Total Cleaned flux density = 5.416 Jy 513 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -10.4 MilliJy,max = 10.3 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 5.47 MilliJy IMAGR2: 19983 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -7.801 MilliJy iter= 773 IMAGR2: Total Cleaned flux density = 5.426 Jy 773 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -7.9 MilliJy,max = 7.5 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 3.68 MilliJy IMAGR2: 19980 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -5.084 MilliJy iter= 1106 IMAGR2: Total Cleaned flux density = 5.408 Jy 1106 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -5.5 MilliJy,max = 7.6 MilliJy IMAGR2: BGC Clean: using 1043 cell beam + residuals > 2.67 MilliJy IMAGR2: 18371 Residual map points loaded IMAGR2: Field 1 min allowed flux = -3.799 MilliJy iter= 1174 IMAGR2: Total Cleaned flux density = 5.416 Jy 1174 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -5.2 MilliJy,max = 4.7 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 2.34 MilliJy IMAGR2: 19987 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 3.139 MilliJy iter= 1631 IMAGR2: Total Cleaned flux density = 5.400 Jy 1631 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.4 MilliJy,max = 3.2 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.54 MilliJy IMAGR2: 19990 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -2.051 MilliJy iter= 2231 IMAGR2: Total Cleaned flux density = 5.398 Jy 2231 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.6 MilliJy,max = 2.4 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.07 MilliJy IMAGR2: 19987 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -1.451 MilliJy iter= 3106 IMAGR2: Total Cleaned flux density = 5.397 Jy 3106 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.3 MilliJy,max = 3.9 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.26 MilliJy IMAGR2: 9279 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.943 MilliJy iter= 3149 IMAGR2: Total Cleaned flux density = 5.398 Jy 3149 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.4 MilliJy,max = 2.2 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 889.97 MicroJy IMAGR2: 19985 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -1.214 MilliJy iter= 4429 IMAGR2: Total Cleaned flux density = 5.380 Jy 4429 comps IMAGR2: ALGSTB: All 326 Rows In AP (Max 1035) IMAGR2: ALGSTB: Ipol gridded model subtraction, chans 1 through 2 IMAGR2: ALGSTB: Pass 1; 315- 0 Cells, with 4500 Pts IMAGR2: Field 1 min = -5.8 MilliJy,max = 6.5 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 2.09 MilliJy IMAGR2: 12634 Residual map points loaded IMAGR2: Field 1 min allowed flux = -3.208 MilliJy iter= 4492 IMAGR2: Total Cleaned flux density = 5.383 Jy 4492 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.2 MilliJy,max = 3.2 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 1.34 MilliJy IMAGR2: 13545 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.596 MilliJy iter= 5068 IMAGR2: Total Cleaned flux density = 5.389 Jy 5068 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.6 MilliJy,max = 4.6 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.49 MilliJy IMAGR2: 11434 Residual map points loaded IMAGR2: Field 1 min allowed flux = 2.292 MilliJy iter= 5127 IMAGR2: Total Cleaned flux density = 5.388 Jy 5127 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.3 MilliJy,max = 2.2 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 954.93 MicroJy IMAGR2: 14126 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.147 MilliJy iter= 5811 IMAGR2: Total Cleaned flux density = 5.375 Jy 5811 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.7 MilliJy,max = 4.4 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.42 MilliJy IMAGR2: 10681 Residual map points loaded IMAGR2: Field 1 min allowed flux = 2.186 MilliJy iter= 5867 IMAGR2: Total Cleaned flux density = 5.381 Jy 5867 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.2 MilliJy,max = 2.2 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 911.04 MicroJy IMAGR2: 12878 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.079 MilliJy iter= 6563 IMAGR2: Total Cleaned flux density = 5.395 Jy 6563 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.3 MilliJy,max = 3.6 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.40 MilliJy IMAGR2: 11171 Residual map points loaded IMAGR2: Field 1 min allowed flux = -2.150 MilliJy iter= 6623 IMAGR2: Total Cleaned flux density = 5.389 Jy 6623 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.1 MilliJy,max = 2.1 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 895.82 MicroJy IMAGR2: 12553 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.067 MilliJy iter= 7257 IMAGR2: Total Cleaned flux density = 5.377 Jy 7257 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.6 MilliJy,max = 4.2 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.36 MilliJy IMAGR2: 11621 Residual map points loaded IMAGR2: Field 1 min allowed flux = 2.091 MilliJy iter= 7319 IMAGR2: Total Cleaned flux density = 5.382 Jy 7319 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.1 MilliJy,max = 2.0 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 871.09 MicroJy IMAGR2: 12252 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.030 MilliJy iter= 7969 IMAGR2: Total Cleaned flux density = 5.394 Jy 7969 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.2 MilliJy,max = 3.6 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.35 MilliJy IMAGR2: 11444 Residual map points loaded IMAGR2: Field 1 min allowed flux = 2.077 MilliJy iter= 8031 IMAGR2: Total Cleaned flux density = 5.390 Jy 8031 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.1 MilliJy,max = 2.1 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 865.63 MicroJy IMAGR2: 12318 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.049 MilliJy iter= 8638 IMAGR2: Total Cleaned flux density = 5.373 Jy 8638 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.3 MilliJy,max = 4.1 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.34 MilliJy IMAGR2: 10804 Residual map points loaded IMAGR2: Field 1 min allowed flux = -2.056 MilliJy iter= 8696 IMAGR2: Total Cleaned flux density = 5.380 Jy 8696 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.0 MilliJy,max = 2.1 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 856.71 MicroJy IMAGR2: 12659 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.063 MilliJy iter= 9257 IMAGR2: Total Cleaned flux density = 5.398 Jy 9257 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.0 MilliJy,max = 3.2 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.29 MilliJy IMAGR2: 9735 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.987 MilliJy iter= 9312 IMAGR2: Total Cleaned flux density = 5.391 Jy 9312 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -2.0 MilliJy,max = 2.0 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 828.05 MicroJy IMAGR2: 12447 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.019 MilliJy iter= 9876 IMAGR2: Total Cleaned flux density = 5.375 Jy 9876 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.1 MilliJy,max = 3.9 MilliJy IMAGR2: BGC Clean: using 1745 cell beam + residuals > 1.27 MilliJy IMAGR2: 9432 Residual map points loaded IMAGR2: Field 1 min allowed flux = 1.948 MilliJy iter= 9931 IMAGR2: Total Cleaned flux density = 5.381 Jy 9931 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -1.9 MilliJy,max = 1.9 MilliJy IMAGR2: BGC Clean: using 315 cell beam + residuals > 811.51 MicroJy IMAGR2: 12608 Residual map points loaded IMAGR2: Field 1 min Clean flux = 996.744 MicroJy iter= 10491 IMAGR2: Total Cleaned flux density = 5.397 Jy 10491 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Peak residual in window 996.744 less than limit 996.863 MicroJy IMAGR2: Merging the Clean components files IMAGR2: Field 1 compressed from 10491 to 4066 components IMAGR2: Field 1 min = -3.7 MilliJy,max = 2.9 MilliJy IMAGR2: Restoring Clean components IMAGR2: Checking image max/min IMAGR2: Field 1 final Clean flux 5.397 Jy IMAGR2: Deleting UV work file: IMAGR2: Destroyed 1 extension files of type AN IMAGR2: Destroyed 1 extension files of type FQ IMAGR2: Destroyed UV image file: catno= 6 disk= 1 IMAGR2: Appears to have ended successfully IMAGR2: hamal 31DEC06 TST: Cpu= 64.1 Real= 65 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN SETFC2: Task SETFC (release of 31DEC06) begins SETFC2: Found 0019+734 C BAND Seq 1 Disk: 1 in slot 4 SETFC2: SETCEL: recommends IMSIZE 718 CELLSIZE 0.77000 SETFC2: SETCEL: returns IMSIZE 1024 CELLSIZE 0.77000 SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /tmp/SETFC@0019+734_C,BAND.0-1 SETFC2: FLYEYE added 1 fields to BOXFILE to 0.000 deg SETFC2: WARNING: THIS MAY NOT COVER THE DESIRED AREA SETFC2: First field number written was 1 SETFC2: Highest field number written was 1 SETFC2: returns adverbs to AIPS SETFC2: Appears to have ended successfully SETFC2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN SETFC2: Task SETFC (release of 31DEC06) begins SETFC2: Found 0019+734 C BAND Seq 1 Disk: 1 in slot 4 SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /tmp/SETFC@0019+734_C,BAND.0-1 SETFC2: Searching catalog between 0.05 and 0.23 degrees radius SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /home/auto/aips/TEXT/STARS/NV00.0030 SETFC2: Field RA Dec Flux Beam Sep SETFC2: 2 00:19:29.64 73:23:04.9 0.111 0.473 0.076 SETFC2: Add NVSS: wrote 1 fields to BOXFILE SETFC2: The Sun is 80.9 deg away - ignoring SETFC2: First field number written was 2 SETFC2: Highest field number written was 2 SETFC2: returns adverbs to AIPS SETFC2: Appears to have ended successfully SETFC2: hamal 31DEC06 TST: Cpu= 0.1 Real= 1 C 1 1012 1012 00 19 45.79 73 27 30.0 00001 -1 507 512 513 C 2 246 246 00 19 29.64 73 23 04.9 00002 -1 100 128 129 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0019+734_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :2 =0019+734' AIPS 2: ' ' IMAGR2: Task IMAGR (release of 31DEC06) begins IMAGR2: ZTXOP2: using translated file name = IMAGR2: ZTXOP2: /tmp/SETFC@0019+734_C,BAND.0-1 IMAGR2: FIELDF: Final field parameters and # read are: IMAGR2: Field 1 1012 1012 1.5374E-02 -1.7000E-02 0 IMAGR2: Field 2 246 246 -6.8956E+01 -2.6512E+02 0 IMAGR2: ZTXOP2: using translated file name = IMAGR2: ZTXOP2: /tmp/SETFC@0019+734_C,BAND.0-1 IMAGR2: WINDF: Number of clean boxes/field read as follows: IMAGR2: Field 01: 1 Field 02: 1 IMAGR2: Create 0019+734 .IMAGR . 1 (UV) on disk 1 cno 7 IMAGR2: Beginning channel 1 through 1 with 2 IFs IMAGR2: IMACPY: Copied 6325 visibilities to be imaged IMAGR2: **** WARNING data included out of inner portion of UV plane **** IMAGR2: **** Watch for high-frequency & other poor cleaning effects **** IMAGR2: UVWAIT: begin finding uniform weights IMAGR2: UVWAIT: Average grid weight 1.511E+04 IMAGR2: UVWAIT: Adding temperance S 3.022E+03 IMAGR2: UVWAIT: begin applying uniform or other weights IMAGR2: UVWAIT: Sum of weights in 2.018E+07 and out 2.597E+07 IMAGR2: UVWAIT: Noise is increased by a factor 1.113 due to weighting IMAGR2: UVWAIT: Average summed weight 1.511E+04 over 12646 vis IMAGR2: Create 0019+734 .IBM001. 1 (MA) on disk 1 cno 8 IMAGR2: Create 0019+734 .IBM002. 1 (MA) on disk 1 cno 9 IMAGR2: Create 0019+734 .ICL001. 1 (MA) on disk 1 cno 10 IMAGR2: Create 0019+734 .ICL002. 1 (MA) on disk 1 cno 11 IMAGR2: GRDFLT: X and Y convolution type = SPHEROIDAL IMAGR2: GRDFLT: X and Y parms = 3.0000 1.0000 IMAGR2: GRDFLT: convolution function sampled every 1/100 of a cell IMAGR2: GRDMEM: Ave 2 Channels; 4.885100E+09 to 4.835100E+09 Hz IMAGR2: Field 1 Sum of gridding weights = 2.75686E+08 IMAGR2: Field 1 Beam min = -146.4 MilliJy, max = 1.0 Jy IMAGR2: Field 1 fit FWHM = 3.919 x 2.079 arcsec, PA= 76.2 IMAGR2: Field 2 Sum of gridding weights = 2.75683E+08 IMAGR2: Field 2 Beam min = -98.4 MilliJy, max = 1.0 Jy IMAGR2: Field 2 fit FWHM = 3.919 x 2.077 arcsec, PA= 76.2 IMAGR2: CLBHIS: minimum component 0.449 of current peak IMAGR2: Field 1 min = -41.9 MilliJy,max = 434.0 MilliJy IMAGR2: Field 2 min = -30.3 MilliJy,max = 43.4 MilliJy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 50.85 MilliJy IMAGR2: 591 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 186.808 MilliJy iter= 9 IMAGR2: Field 1 Clean flux density= 265.838 MilliJy 9 comps IMAGR2: Total Cleaned flux density = 265.838 MilliJy 9 comps IMAGR2: SETDO3: imaging done with multiple tangent planes IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: VISDFT: Model components of type Point IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -15.7 MilliJy,max = 168.1 MilliJy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 21.89 MilliJy IMAGR2: 397 Residual map points loaded IMAGR2: Field 1 min allowed flux = 72.375 MilliJy iter= 18 IMAGR2: Field 1 Clean flux density= 368.833 MilliJy 18 comps IMAGR2: Total Cleaned flux density = 368.833 MilliJy 18 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -6.5 MilliJy,max = 65.1 MilliJy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 8.48 MilliJy IMAGR2: 486 Residual map points loaded IMAGR2: Field 1 min allowed flux = 28.226 MilliJy iter= 27 IMAGR2: Field 1 Clean flux density= 408.754 MilliJy 27 comps IMAGR2: Total Cleaned flux density = 408.754 MilliJy 27 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 2 min = -3.1 MilliJy,max = 4.8 MilliJy IMAGR2: TRY ANOTHER FIELD: this is 4.561E-03 < Second best 2.684E-02 IMAGR2: Field 1 min = -4.2 MilliJy,max = 25.5 MilliJy IMAGR2: BGC Clean: using 2043 cell beam + residuals > 3.31 MilliJy IMAGR2: 1183 Residual map points loaded IMAGR2: Field 1 min allowed flux = 11.308 MilliJy iter= 37 IMAGR2: Field 1 Clean flux density= 426.238 MilliJy 37 comps IMAGR2: Total Cleaned flux density = 426.238 MilliJy 37 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.7 MilliJy,max = 10.5 MilliJy IMAGR2: BGC Clean: using 963 cell beam + residuals > 1.54 MilliJy IMAGR2: 17214 Residual map points loaded IMAGR2: Field 1 min allowed flux = -4.613 MilliJy iter= 52 IMAGR2: Field 1 Clean flux density= 435.058 MilliJy 52 comps IMAGR2: Total Cleaned flux density = 435.058 MilliJy 52 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 2 min = -3.7 MilliJy,max = 4.3 MilliJy IMAGR2: TRY ANOTHER FIELD: this is 4.099E-03 < Second best 4.394E-03 IMAGR2: Field 1 min = -4.9 MilliJy,max = 6.4 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.42 MilliJy IMAGR2: 19189 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 3.056 MilliJy iter= 151 IMAGR2: Field 1 Clean flux density= 433.403 MilliJy 151 comps IMAGR2: Total Cleaned flux density = 433.403 MilliJy 151 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 2 min = -3.1 MilliJy,max = 3.5 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.42 MilliJy IMAGR2: 668 Residual map points loaded IMAGR2: Field 2 min algorithm flux= 1.953 MilliJy iter= 66 IMAGR2: Field 2 Clean flux density= -814.539 MicroJy 66 comps IMAGR2: Total Cleaned flux density = 432.588 MilliJy 217 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.7 MilliJy,max = 5.7 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.38 MilliJy IMAGR2: 19218 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -2.452 MilliJy iter= 394 IMAGR2: Field 1 Clean flux density= 422.392 MilliJy 394 comps IMAGR2: Total Cleaned flux density = 421.578 MilliJy 460 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.2 MilliJy,max = 5.1 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.33 MilliJy IMAGR2: 19091 Residual map points loaded IMAGR2: Field 1 min algorithm flux= -2.129 MilliJy iter= 757 IMAGR2: Field 1 Clean flux density= 427.997 MilliJy 757 comps IMAGR2: Total Cleaned flux density = 427.182 MilliJy 823 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.4 MilliJy,max = 4.8 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.26 MilliJy IMAGR2: 18839 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 1.893 MilliJy iter= 1269 IMAGR2: Field 1 Clean flux density= 414.436 MilliJy 1269 comps IMAGR2: Total Cleaned flux density = 413.622 MilliJy 1335 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 2 min = -2.2 MilliJy,max = 2.6 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.25 MilliJy IMAGR2: 737 Residual map points loaded IMAGR2: Field 2 min algorithm flux= -1.439 MilliJy iter= 251 IMAGR2: Field 2 Clean flux density= 3.091 MilliJy 251 comps IMAGR2: Total Cleaned flux density = 417.527 MilliJy 1520 comps IMAGR2: ALGSTB: All 115 Rows In AP (Max 267) IMAGR2: ALGSTB field 2 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 104- 0 Cells, with 6325 Pts IMAGR2: Field 1 min = -4.1 MilliJy,max = 4.8 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.17 MilliJy IMAGR2: 18961 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 1.671 MilliJy iter= 2032 IMAGR2: Field 1 Clean flux density= 420.488 MilliJy 2032 comps IMAGR2: Total Cleaned flux density = 423.579 MilliJy 2283 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.4 MilliJy,max = 4.4 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.08 MilliJy IMAGR2: 18567 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 1.498 MilliJy iter= 2999 IMAGR2: Field 1 Clean flux density= 399.361 MilliJy 2999 comps IMAGR2: Total Cleaned flux density = 402.452 MilliJy 3250 comps IMAGR2: ALGSTB: All 425 Rows In AP (Max 1035) IMAGR2: ALGSTB field 1 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 414- 0 Cells, with 6325 Pts IMAGR2: Field 1 min = -4.3 MilliJy,max = 4.9 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.05 MilliJy IMAGR2: 18382 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 1.439 MilliJy iter= 4313 IMAGR2: Field 1 Clean flux density= 421.777 MilliJy 4313 comps IMAGR2: Total Cleaned flux density = 424.868 MilliJy 4564 comps IMAGR2: ALGSTB: All 425 Rows In AP (Max 1035) IMAGR2: ALGSTB field 1 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 414- 0 Cells, with 6325 Pts IMAGR2: Field 2 min = -1.5 MilliJy,max = 1.9 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.03 MilliJy IMAGR2: 139 Residual map points loaded IMAGR2: Field 2 min algorithm flux= -1.047 MilliJy iter= 317 IMAGR2: Field 2 Clean flux density= 881.017 MicroJy 317 comps IMAGR2: Total Cleaned flux density = 422.658 MilliJy 4630 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -4.8 MilliJy,max = 4.6 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 1.01 MilliJy IMAGR2: 19827 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.746 MilliJy iter= 4698 IMAGR2: Field 1 Clean flux density= 403.763 MilliJy 4698 comps IMAGR2: Total Cleaned flux density = 404.644 MilliJy 5015 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.8 MilliJy,max = 4.5 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 925.89 MicroJy IMAGR2: 19664 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 1.191 MilliJy iter= 6234 IMAGR2: Field 1 Clean flux density= 412.567 MilliJy 6234 comps IMAGR2: Total Cleaned flux density = 413.448 MilliJy 6551 comps IMAGR2: ALGSTB: All 425 Rows In AP (Max 1035) IMAGR2: ALGSTB field 1 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 414- 0 Cells, with 6325 Pts IMAGR2: Field 1 min = -3.4 MilliJy,max = 4.0 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 760.71 MicroJy IMAGR2: 18998 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 970.006 MicroJy iter= 8062 IMAGR2: Field 1 Clean flux density= 373.719 MilliJy 8062 comps IMAGR2: Total Cleaned flux density = 374.600 MilliJy 8379 comps IMAGR2: ALGSTB: All 425 Rows In AP (Max 1035) IMAGR2: ALGSTB field 1 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 414- 0 Cells, with 6325 Pts IMAGR2: Field 2 min = -1.2 MilliJy,max = 1.6 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 756.57 MicroJy IMAGR2: 417 Residual map points loaded IMAGR2: Field 2 min Clean flux = 840.807 MicroJy iter= 417 IMAGR2: Field 2 Clean flux density= 3.543 MilliJy 417 comps IMAGR2: Total Cleaned flux density = 377.262 MilliJy 8479 comps IMAGR2: ALGSTB: All 115 Rows In AP (Max 267) IMAGR2: ALGSTB field 2 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 104- 0 Cells, with 6325 Pts IMAGR2: Field 1 min = -3.5 MilliJy,max = 3.9 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 721.03 MicroJy IMAGR2: 19982 Residual map points loaded IMAGR2: Field 1 min algorithm flux= 898.294 MicroJy iter= 10144 IMAGR2: Field 1 Clean flux density= 412.872 MilliJy 10144 comps IMAGR2: Total Cleaned flux density = 416.415 MilliJy 10561 comps IMAGR2: ALGSTB: All 425 Rows In AP (Max 1035) IMAGR2: ALGSTB field 1 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 414- 0 Cells, with 6325 Pts IMAGR2: Field 1 min = -3.7 MilliJy,max = 3.3 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 681.29 MicroJy IMAGR2: 19989 Residual map points loaded IMAGR2: Field 1 min allowed flux = -1.119 MilliJy iter= 10630 IMAGR2: Field 1 Clean flux density= 378.408 MilliJy 10630 comps IMAGR2: Total Cleaned flux density = 381.950 MilliJy 11047 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Field 1 min = -3.3 MilliJy,max = 3.5 MilliJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 651.09 MicroJy IMAGR2: 19993 Residual map points loaded IMAGR2: Field 1 min Clean flux = -840.777 MicroJy iter= 12016 IMAGR2: Field 1 Clean flux density= 400.021 MilliJy 12016 comps IMAGR2: Total Cleaned flux density = 403.564 MilliJy 12433 comps IMAGR2: ALGSTB: All 425 Rows In AP (Max 1035) IMAGR2: ALGSTB field 1 Ipol gridded model subtraction chns 1- 2 IMAGR2: ALGSTB: Pass 1; 414- 0 Cells, with 6325 Pts IMAGR2: Peak residual in window 840.807 less than limit 840.836 MicroJy IMAGR2: Merging the Clean components files IMAGR2: Field 1 compressed from 12016 to 5197 components IMAGR2: Field 2 compressed from 417 to 200 components IMAGR2: Field 1 min = -3.4 MilliJy,max = 3.2 MilliJy IMAGR2: Field 2 min = -1.4 MilliJy,max = 1.2 MilliJy IMAGR2: Restoring Clean components IMAGR2: Restoring overlapped Clean components IMAGR2: Restore -9.117 MilliJy ( 352 CCs) from field 1 to field 2 IMAGR2: Restore 3.543 MilliJy ( 200 CCs) from field 2 to field 1 IMAGR2: Checking image max/min IMAGR2: Field 1 final Clean flux 403.564 MilliJy IMAGR2: Field 2 final Clean flux -5.574 MilliJy IMAGR2: Deleting UV work file: IMAGR2: Destroyed 1 extension files of type AN IMAGR2: Destroyed 1 extension files of type FQ IMAGR2: Destroyed UV image file: catno= 7 disk= 1 IMAGR2: Appears to have ended successfully IMAGR2: hamal 31DEC06 TST: Cpu= 41.9 Real= 42 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0019+734_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :2 =0019+734' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 8 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 9 disk= 1 AIPS 2: Disk 1 in-CNO 10 renumbered as CNO 7 AIPS 2: Disk 1 in-CNO 11 renumbered as CNO 8 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.06096 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@G000301A_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN SETFC2: Task SETFC (release of 31DEC06) begins SETFC2: Found G000301A C BAND Seq 1 Disk: 1 in slot 5 SETFC2: SETCEL: recommends IMSIZE 688 CELLSIZE 0.80317 SETFC2: SETCEL: returns IMSIZE 512 CELLSIZE 0.80317 SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /tmp/SETFC@G000301A_C,BAND.0-1 SETFC2: FLYEYE added 7 fields to BOXFILE to 0.091 deg SETFC2: First field number written was 1 SETFC2: Highest field number written was 7 SETFC2: returns adverbs to AIPS SETFC2: Appears to have ended successfully SETFC2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0019+734_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :2 =0019+734' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 8 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 9 disk= 1 AIPS 2: Disk 1 in-CNO 10 renumbered as CNO 7 AIPS 2: Disk 1 in-CNO 11 renumbered as CNO 8 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.06096 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@G000301A_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN SETFC2: Task SETFC (release of 31DEC06) begins SETFC2: Found G000301A C BAND Seq 1 Disk: 1 in slot 5 SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /tmp/SETFC@G000301A_C,BAND.0-1 SETFC2: Searching catalog between 0.05 and 0.23 degrees radius SETFC2: ZTXOP2: using translated file name = SETFC2: ZTXOP2: /home/auto/aips/TEXT/STARS/NV00.0030 SETFC2: No NVSS sources selected for BOXFILE SETFC2: The Sun is 82.4 deg away - ignoring SETFC2: First field number written was 8 SETFC2: Highest field number written was 7 SETFC2: returns adverbs to AIPS SETFC2: Appears to have ended successfully SETFC2: hamal 31DEC06 TST: Cpu= 3.1 Real= 4 C 1 500 500 23 39 27.12 75 47 12.9 00001 -1 251 256 257 C 2 500 500 23 39 27.12 75 41 45.2 00002 -1 251 256 257 C 3 500 500 23 38 10.33 75 44 28.3 00003 -1 251 256 257 C 4 500 500 23 40 43.91 75 44 28.3 00004 -1 251 256 257 C 5 500 500 23 38 09.84 75 49 55.9 00005 -1 251 256 257 C 6 500 500 23 40 44.40 75 49 55.9 00006 -1 251 256 257 C 7 500 500 23 39 27.12 75 52 40.5 00007 -1 251 256 257 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0019+734_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :2 =0019+734' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 8 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 9 disk= 1 AIPS 2: Disk 1 in-CNO 10 renumbered as CNO 7 AIPS 2: Disk 1 in-CNO 11 renumbered as CNO 8 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.06096 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@G000301A_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@G000301A_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :3 =G000301A' AIPS 2: ' ' IMAGR2: Task IMAGR (release of 31DEC06) begins IMAGR2: ZTXOP2: using translated file name = IMAGR2: ZTXOP2: /tmp/SETFC@G000301A_C,BAND.0-1 IMAGR2: FIELDF: Final field parameters and # read are: IMAGR2: Field 1 500 500 5.0244E-11 4.0000E-02 0 IMAGR2: Field 2 500 500 5.0244E-11 -3.2766E+02 0 IMAGR2: Field 3 500 500 -2.8281E+02 -1.6456E+02 0 IMAGR2: Field 4 500 500 2.8281E+02 -1.6456E+02 0 IMAGR2: Field 5 500 500 -2.8462E+02 1.6304E+02 0 IMAGR2: Field 6 500 500 2.8462E+02 1.6304E+02 0 IMAGR2: Field 7 500 500 5.0244E-11 3.2764E+02 0 IMAGR2: ZTXOP2: using translated file name = IMAGR2: ZTXOP2: /tmp/SETFC@G000301A_C,BAND.0-1 IMAGR2: WINDF: Number of clean boxes/field read as follows: IMAGR2: Field 01: 1 Field 02: 1 Field 03: 1 Field 04: 1 IMAGR2: Field 05: 1 Field 06: 1 Field 07: 1 IMAGR2: Create G000301A .IMAGR . 1 (UV) on disk 1 cno 9 IMAGR2: Beginning channel 1 through 1 with 2 IFs IMAGR2: IMACPY: Copied 33425 visibilities to be imaged IMAGR2: **** WARNING data included out of inner portion of UV plane **** IMAGR2: **** Watch for high-frequency & other poor cleaning effects **** IMAGR2: UVWAIT: begin finding uniform weights IMAGR2: UVWAIT: Average grid weight 1.550E+05 IMAGR2: UVWAIT: Adding temperance S 3.101E+04 IMAGR2: UVWAIT: begin applying uniform or other weights IMAGR2: UVWAIT: Sum of weights in 1.108E+08 and out 1.821E+08 IMAGR2: UVWAIT: Noise is increased by a factor 1.173 due to weighting IMAGR2: UVWAIT: Average summed weight 1.551E+05 over 66850 vis IMAGR2: Create G000301A .IBM001. 1 (MA) on disk 1 cno 10 IMAGR2: Create G000301A .IBM002. 1 (MA) on disk 1 cno 11 IMAGR2: Create G000301A .IBM003. 1 (MA) on disk 1 cno 12 IMAGR2: Create G000301A .IBM004. 1 (MA) on disk 1 cno 13 IMAGR2: Create G000301A .IBM005. 1 (MA) on disk 1 cno 14 IMAGR2: Create G000301A .IBM006. 1 (MA) on disk 1 cno 15 IMAGR2: Create G000301A .IBM007. 1 (MA) on disk 1 cno 16 IMAGR2: Create G000301A .ICL001. 1 (MA) on disk 1 cno 17 IMAGR2: Create G000301A .ICL002. 1 (MA) on disk 1 cno 18 IMAGR2: Create G000301A .ICL003. 1 (MA) on disk 1 cno 19 IMAGR2: Create G000301A .ICL004. 1 (MA) on disk 1 cno 20 IMAGR2: Create G000301A .ICL005. 1 (MA) on disk 1 cno 21 IMAGR2: Create G000301A .ICL006. 1 (MA) on disk 1 cno 22 IMAGR2: Create G000301A .ICL007. 1 (MA) on disk 1 cno 23 IMAGR2: GRDFLT: X and Y convolution type = SPHEROIDAL IMAGR2: GRDFLT: X and Y parms = 3.0000 1.0000 IMAGR2: GRDFLT: convolution function sampled every 1/100 of a cell IMAGR2: GRDMEM: Ave 2 Channels; 4.885100E+09 to 4.835100E+09 Hz IMAGR2: Field 1 Sum of gridding weights = 1.93310E+09 IMAGR2: Field 1 Beam min = -159.3 MilliJy, max = 1.0 Jy IMAGR2: Field 1 fit FWHM = 3.737 x 1.859 arcsec, PA= 66.6 IMAGR2: Field 2 Sum of gridding weights = 1.93310E+09 IMAGR2: Field 2 Beam min = -159.2 MilliJy, max = 1.0 Jy IMAGR2: Field 2 fit FWHM = 3.737 x 1.857 arcsec, PA= 66.7 IMAGR2: Field 3 Sum of gridding weights = 1.93310E+09 IMAGR2: Field 3 Beam min = -158.9 MilliJy, max = 1.0 Jy IMAGR2: Field 3 fit FWHM = 3.738 x 1.859 arcsec, PA= 66.4 IMAGR2: Field 4 Sum of gridding weights = 1.93310E+09 IMAGR2: Field 4 Beam min = -159.6 MilliJy, max = 1.0 Jy IMAGR2: Field 4 fit FWHM = 3.737 x 1.857 arcsec, PA= 66.9 IMAGR2: Field 5 Sum of gridding weights = 1.93310E+09 IMAGR2: Field 5 Beam min = -158.9 MilliJy, max = 1.0 Jy IMAGR2: Field 5 fit FWHM = 3.738 x 1.862 arcsec, PA= 66.4 IMAGR2: Field 6 Sum of gridding weights = 1.93309E+09 IMAGR2: Field 6 Beam min = -159.6 MilliJy, max = 1.0 Jy IMAGR2: Field 6 fit FWHM = 3.737 x 1.860 arcsec, PA= 66.9 IMAGR2: Field 7 Sum of gridding weights = 1.93310E+09 IMAGR2: Field 7 Beam min = -159.3 MilliJy, max = 1.0 Jy IMAGR2: Field 7 fit FWHM = 3.737 x 1.862 arcsec, PA= 66.6 IMAGR2: CLBHIS: minimum component 0.500 of current peak IMAGR2: Field 1 min = -328.9 MicroJy,max = 411.0 MicroJy IMAGR2: Field 2 min = -363.9 MicroJy,max = 394.8 MicroJy IMAGR2: Field 3 min = -348.2 MicroJy,max = 324.1 MicroJy IMAGR2: Field 4 min = -343.9 MicroJy,max = 337.7 MicroJy IMAGR2: Field 5 min = -345.6 MicroJy,max = 322.8 MicroJy IMAGR2: Field 6 min = -328.6 MicroJy,max = 373.2 MicroJy IMAGR2: Field 7 min = -324.0 MicroJy,max = 355.7 MicroJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 139.95 MicroJy IMAGR2: 10146 Residual map points loaded IMAGR2: Field 1 min Clean flux = 332.914 MicroJy iter= 3 IMAGR2: Field 1 Clean flux density= 111.382 MicroJy 3 comps IMAGR2: Total Cleaned flux density = 111.382 MicroJy 3 comps IMAGR2: SETDO3: imaging done with multiple tangent planes IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: VISDFT: Model components of type Point IMAGR2: I Polarization model processed IMAGR2: Field 6 min = -333.9 MicroJy,max = 374.0 MicroJy IMAGR2: BGC Clean: using 103 cell beam + residuals > 116.78 MicroJy IMAGR2: 19989 Residual map points loaded IMAGR2: Field 6 min Clean flux = 336.643 MicroJy iter= 2 IMAGR2: Field 6 Clean flux density= 71.069 MicroJy 2 comps IMAGR2: Total Cleaned flux density = 182.451 MicroJy 5 comps IMAGR2: VISDFT: Begin DFT component subtraction IMAGR2: I Polarization model processed IMAGR2: Peak residual in window 363.864 less than limit 365.768 MicroJy IMAGR2: Merging the Clean components files IMAGR2: Field 1 compressed from 3 to 1 components IMAGR2: Field 2 compressed from 0 to 0 components IMAGR2: Field 3 compressed from 0 to 0 components IMAGR2: Field 4 compressed from 0 to 0 components IMAGR2: Field 5 compressed from 0 to 0 components IMAGR2: Field 6 compressed from 2 to 1 components IMAGR2: Field 7 compressed from 0 to 0 components IMAGR2: Field 1 min = -328.4 MicroJy,max = 313.4 MicroJy IMAGR2: Field 2 min = -367.2 MicroJy,max = 392.1 MicroJy IMAGR2: Field 3 min = -350.0 MicroJy,max = 323.6 MicroJy IMAGR2: Field 4 min = -343.2 MicroJy,max = 336.1 MicroJy IMAGR2: Field 5 min = -345.3 MicroJy,max = 323.3 MicroJy IMAGR2: Field 6 min = -333.5 MicroJy,max = 332.2 MicroJy IMAGR2: Field 7 min = -322.8 MicroJy,max = 349.3 MicroJy IMAGR2: Restoring Clean components IMAGR2: Restoring overlapped Clean components IMAGR2: Restore 111.382 MicroJy ( 1 CCs) from field 1 to field 4 IMAGR2: Restore 71.069 MicroJy ( 1 CCs) from field 6 to field 1 IMAGR2: Restore 71.069 MicroJy ( 1 CCs) from field 6 to field 7 IMAGR2: Checking image max/min IMAGR2: Field 1 final Clean flux 182.451 MicroJy IMAGR2: Field 2 final Clean flux 0.000 Jy IMAGR2: Field 3 final Clean flux 0.000 Jy IMAGR2: Field 4 final Clean flux 111.382 MicroJy IMAGR2: Field 5 final Clean flux 0.000 Jy IMAGR2: Field 6 final Clean flux 71.069 MicroJy IMAGR2: Field 7 final Clean flux 71.069 MicroJy IMAGR2: Deleting UV work file: IMAGR2: Destroyed 1 extension files of type AN IMAGR2: Destroyed 1 extension files of type FQ IMAGR2: Destroyed UV image file: catno= 9 disk= 1 IMAGR2: Appears to have ended successfully IMAGR2: hamal 31DEC06 TST: Cpu= 9.7 Real= 10 IPS 2: Resumes AIPS 2: Resumes AIPS 2: Destroyed 1 extension files of type CC AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 2 disk= 1 AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: Resumes AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1661 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0137+331_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :1 =0137+331' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0137+331_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 7 disk= 1 AIPS 2: Disk 1 in-CNO 8 renumbered as CNO 6 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.1401 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@0019+734_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :2 =0019+734' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@0019+734_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 8 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 9 disk= 1 AIPS 2: Disk 1 in-CNO 10 renumbered as CNO 7 AIPS 2: Disk 1 in-CNO 11 renumbered as CNO 8 AIPS 2: ' ' AIPS 2: 'ESTIMATED RMS:' '0.06096 MILLI JANSKY' AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@G000301A_C,BAND.0-1 >& /dev/null AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: 'SEARCHING FOR NVSS SOURCES' AIPS 2: Found in Version=ABIN AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: Found in Version=ABIN AIPS 2: SETFC was not found to be running AIPS 2: SYSTEM command to be executed is: AIPS 2: cat /tmp/SETFC@G000301A_C,BAND.0-1 >> /home/hamal/vlbacald/run/A AIPS 2: K485_2000MAR03_1.0.log AIPS 2: ' NOW STARTING WITH SOURCE :3 =G000301A' AIPS 2: ' ' AIPS 2: Resumes AIPS 2: SYSTEM command to be executed is: AIPS 2: rm -f /tmp/SETFC@G000301A_C,BAND.0-1 >& /dev/null AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 10 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 11 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 12 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 13 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 14 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 15 disk= 1 AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 9 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 10 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' FLATN2: Task FLATN (release of 31DEC06) begins FLATN2: Create 0137+331 .FLATN . 1 (MA) on disk 1 cno 16 FLATN2: Start field 1 FLATN2: Appears to have ended successfully FLATN2: hamal 31DEC06 TST: Cpu= 3.0 Real= 3 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished BLANK2: Task BLANK (release of 31DEC06) begins BLANK2: Create 0137+331 .BLANK . 1 (MA) on disk 1 cno 17 BLANK2: BEGIN PLANE 1. OF 1. BLANK2: Begin final output stage for blanked image BLANK2: Appears to have ended successfully BLANK2: hamal 31DEC06 TST: Cpu= 1.8 Real= 2 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' FLATN2: Task FLATN (release of 31DEC06) begins FLATN2: Create 0019+734 .FLATN . 1 (MA) on disk 1 cno 17 FLATN2: Start field 1 FLATN2: Start field 2 FLATN2: Now divide by the sum of the weights FLATN2: Appears to have ended successfully FLATN2: hamal 31DEC06 TST: Cpu= 2.4 Real= 2 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished BLANK2: Task BLANK (release of 31DEC06) begins BLANK2: Create 0019+734 .BLANK . 1 (MA) on disk 1 cno 18 BLANK2: BEGIN PLANE 1. OF 1. BLANK2: Begin final output stage for blanked image BLANK2: Appears to have ended successfully BLANK2: hamal 31DEC06 TST: Cpu= 1.1 Real= 1 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 17 disk= 1 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' FLATN2: Task FLATN (release of 31DEC06) begins FLATN2: Create G000301A .FLATN . 1 (MA) on disk 1 cno 18 FLATN2: Start field 1 FLATN2: Start field 2 FLATN2: Start field 3 FLATN2: Start field 4 FLATN2: Start field 5 FLATN2: Start field 6 FLATN2: Start field 7 FLATN2: Now divide by the sum of the weights FLATN2: Appears to have ended successfully FLATN2: hamal 31DEC06 TST: Cpu= 3.7 Real= 4 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 17 disk= 1 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished BLANK2: Task BLANK (release of 31DEC06) begins BLANK2: Create G000301A .BLANK . 1 (MA) on disk 1 cno 19 BLANK2: BEGIN PLANE 1. OF 1. BLANK2: Begin final output stage for blanked image BLANK2: Appears to have ended successfully BLANK2: hamal 31DEC06 TST: Cpu= 1.1 Real= 2 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 17 disk= 1 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 18 disk= 1 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.TASAV.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.ICL002.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL002.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL003.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL004.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL005.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL006.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL007.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Mean=-2.6462E-07 rms= 4.5300E-04 JY/BEAM over 648333. pixels AIPS 2: Maximum= 1.7614E-02 at 400 641 1 1 1 1 1 AIPS 2: Skypos: RA 01 37 44.01982 DEC 33 11 27.3311 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-8.6906E-03 at 177 801 1 1 1 1 1 AIPS 2: Skypos: RA 01 37 54.85671 DEC 33 13 04.8514 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = -8.4112E-03 Jy. Beam area = 20.40 pixels IMEAN2: Task IMEAN (release of 31DEC06) begins IMEAN2: Image= 0137+331 .BLANK . 1 1 xywind= 1 1 912 912 IMEAN2: Mean and rms found by fitting peak in histogram: IMEAN2: Mean= 3.6121E-05 Rms= 3.3241E-04 **** from histogram IMEAN2: Mean and rms found by including all data: IMEAN2: Mean= 1.6979E-04 Rms= 2.1103E-02 JY/BEAM over 651933 pixels IMEAN2: Flux density = 5.4268E+00 Jy. beam area = 20.40 pixels IMEAN2: Minimum=-8.6906E-03 at 177 801 1 1 IMEAN2: Skypos: RA 01 37 54.85671 DEC 33 13 04.8514 IMEAN2: Maximum= 5.0411E+00 at 456 457 1 1 IMEAN2: Skypos: RA 01 37 41.29950 DEC 33 09 35.1340 IMEAN2: Skypos: IPOL 4860.100 MHZ IMEAN2: returns adverbs to AIPS IMEAN2: Appears to have ended successfully IMEAN2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 17 disk= 1 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 18 disk= 1 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.TASAV.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.ICL002.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL002.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL003.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL004.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL005.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL006.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL007.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Mean=-2.6462E-07 rms= 4.5300E-04 JY/BEAM over 648333. pixels AIPS 2: Maximum= 1.7614E-02 at 400 641 1 1 1 1 1 AIPS 2: Skypos: RA 01 37 44.01982 DEC 33 11 27.3311 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-8.6906E-03 at 177 801 1 1 1 1 1 AIPS 2: Skypos: RA 01 37 54.85671 DEC 33 13 04.8514 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = -8.4112E-03 Jy. Beam area = 20.40 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Mean= 2.1222E-06 rms= 2.8685E-04 JY/BEAM over 405245. pixels AIPS 2: Maximum= 7.1099E-03 at 625 291 1 1 1 1 1 AIPS 2: Skypos: RA 00 18 58.23031 DEC 73 26 35.0103 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-5.0429E-03 at 625 294 1 1 1 1 1 AIPS 2: Skypos: RA 00 18 58.22852 DEC 73 26 37.3202 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 5.5236E-02 Jy. Beam area = 15.57 pixels IMEAN2: Task IMEAN (release of 31DEC06) begins IMEAN2: Image= 0019+734 .BLANK . 1 1 xywind= 1 1 722 722 IMEAN2: Mean and rms found by fitting peak in histogram: IMEAN2: Mean= 4.8704E-06 Rms= 2.4583E-04 **** from histogram IMEAN2: Mean and rms found by including all data: IMEAN2: Mean= 1.8824E-05 Rms= 1.9194E-03 JY/BEAM over 408845 pixels IMEAN2: Flux density = 4.9429E-01 Jy. beam area = 15.57 pixels IMEAN2: Minimum=-5.0429E-03 at 625 294 1 1 IMEAN2: Skypos: RA 00 18 58.22852 DEC 73 26 37.3202 IMEAN2: Maximum= 4.3132E-01 at 361 362 1 1 IMEAN2: Skypos: RA 00 19 45.78640 DEC 73 27 30.0170 IMEAN2: Skypos: IPOL 4860.100 MHZ IMEAN2: returns adverbs to AIPS IMEAN2: Appears to have ended successfully IMEAN2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 in-CNO 19 renumbered as CNO 11 AIPS 2: Disk 1 in-CNO 20 renumbered as CNO 12 AIPS 2: Disk 1 in-CNO 21 renumbered as CNO 13 AIPS 2: Disk 1 in-CNO 22 renumbered as CNO 14 AIPS 2: Disk 1 in-CNO 23 renumbered as CNO 15 AIPS 2: ' ' AIPS 2: ' ' AIPS 2: Found in Version=ABIN AIPS 2: '* APPEARS TO HAVE ENDED SUCCESSFULLY *' >>AIPS 2: Disk 1 No files needed renumbering AIPS 2: 'EMPTY CATALOG ?' 15 >AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: '5 SECOND INTEGRATIONS (GUESS)' AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 17 disk= 1 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: 'MINIMUM FOV :277.772 ARCSEC RADIUS' AIPS 2: Resumes AIPS 2: Task FLATN has finished AIPS 2: Resumes AIPS 2: Task BLANK has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 18 disk= 1 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 20000303.TASAV.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 0137+331.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV 0019+734.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=UV G000301A.C BAND.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.ICL002.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL001.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL002.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL003.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL004.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL005.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL006.1 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.ICL007.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Mean=-2.6462E-07 rms= 4.5300E-04 JY/BEAM over 648333. pixels AIPS 2: Maximum= 1.7614E-02 at 400 641 1 1 1 1 1 AIPS 2: Skypos: RA 01 37 44.01982 DEC 33 11 27.3311 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-8.6906E-03 at 177 801 1 1 1 1 1 AIPS 2: Skypos: RA 01 37 54.85671 DEC 33 13 04.8514 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = -8.4112E-03 Jy. Beam area = 20.40 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Mean= 2.1222E-06 rms= 2.8685E-04 JY/BEAM over 405245. pixels AIPS 2: Maximum= 7.1099E-03 at 625 291 1 1 1 1 1 AIPS 2: Skypos: RA 00 18 58.23031 DEC 73 26 35.0103 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-5.0429E-03 at 625 294 1 1 1 1 1 AIPS 2: Skypos: RA 00 18 58.22852 DEC 73 26 37.3202 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 5.5236E-02 Jy. Beam area = 15.57 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Mean= 2.8183E-09 rms= 7.0513E-05 JY/BEAM over 372141. pixels AIPS 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels IMEAN2: Task IMEAN (release of 31DEC06) begins IMEAN2: Image= G000301A .BLANK . 1 1 xywind= 1 1 692 692 IMEAN2: Mean and rms found by fitting peak in histogram: IMEAN2: Mean=-2.2654E-07 Rms= 7.0748E-05 **** from histogram IMEAN2: Mean and rms found by including all data: IMEAN2: Mean=-1.3374E-08 Rms= 7.0537E-05 JY/BEAM over 375741 pixels IMEAN2: Flux density = -4.1166E-04 Jy. beam area = 12.21 pixels IMEAN2: Minimum=-3.1862E-04 at 512 590 1 1 IMEAN2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 IMEAN2: Maximum= 4.0954E-04 at 252 274 1 1 IMEAN2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 IMEAN2: Skypos: IPOL 4860.100 MHZ IMEAN2: returns adverbs to AIPS IMEAN2: Appears to have ended successfully IMEAN2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 PBCOR2: Task PBCOR (release of 31DEC06) begins PBCOR2: Create 0137+331 .RADCOR. 1 (MA) on disk 1 cno 19 PBCOR2: Appears to have ended successfully PBCOR2: hamal 31DEC06 TST: Cpu= 2.0 Real= 2 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.BLANK.1 PBCOR2: Task PBCOR (release of 31DEC06) begins PBCOR2: Create 0019+734 .RADCOR. 1 (MA) on disk 1 cno 19 PBCOR2: Appears to have ended successfully PBCOR2: hamal 31DEC06 TST: Cpu= 1.2 Real= 1 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.BLANK.1 PBCOR2: Task PBCOR (release of 31DEC06) begins PBCOR2: Create G000301A .RADCOR. 1 (MA) on disk 1 cno 19 PBCOR2: Appears to have ended successfully PBCOR2: hamal 31DEC06 TST: Cpu= 1.1 Real= 1 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.RADCOR.1 CPYRT2: Task CPYRT (release of 31DEC06) begins CPYRT2: Create 0137+331 .NVAS06. 1 (MA) on disk 1 cno 19 CPYRT2: ZTXOP2: using translated file name = CPYRT2: ZTXOP2: /home/hamal/vlbacald/Arch_Cprt CPYRT2: Appears to have ended successfully CPYRT2: hamal 31DEC06 TST: Cpu= 0.1 Real= 0 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Resumes AIPS 2: CPYRT was not found to be running AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.RADCOR.1 CPYRT2: Task CPYRT (release of 31DEC06) begins CPYRT2: Create 0019+734 .NVAS06. 1 (MA) on disk 1 cno 19 CPYRT2: ZTXOP2: using translated file name = CPYRT2: ZTXOP2: /home/hamal/vlbacald/Arch_Cprt CPYRT2: Appears to have ended successfully CPYRT2: hamal 31DEC06 TST: Cpu= 0.0 Real= 0 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Resumes AIPS 2: CPYRT was not found to be running AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.RADCOR.1 AIPS 2: Resumes AIPS 2: CPYRT was not found to be running AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.RADCOR.1 CPYRT2: Task CPYRT (release of 31DEC06) begins CPYRT2: Create G000301A .NVAS06. 1 (MA) on disk 1 cno 19 CPYRT2: ZTXOP2: using translated file name = CPYRT2: ZTXOP2: /home/hamal/vlbacald/Arch_Cprt CPYRT2: Appears to have ended successfully CPYRT2: hamal 31DEC06 TST: Cpu= 0.0 Real= 1 2: Maximum= 4.0954E-04 at 252 274 1 1 1 1 1 AIPS 2: Skypos: RA 23 39 47.59640 DEC 75 46 14.1741 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Minimum=-3.1862E-04 at 512 590 1 1 1 1 1 AIPS 2: Skypos: RA 23 38 50.78325 DEC 75 50 27.8594 AIPS 2: Skypos: IPOL 4860.100 MHZ AIPS 2: Flux density = 8.5919E-05 Jy. Beam area = 12.21 pixels AIPS 2: Waiting for returned adverbs AIPS 2: Resumes AIPS 2: IMEAN was not found to be running AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.BLANK.1 AIPS 2: Resumes AIPS 2: Task PBCOR has finished AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Disk 1 No files needed renumbering AIPS 2: Got(1) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0137+331.RADCOR.1 AIPS 2: Resumes AIPS 2: CPYRT was not found to be running AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA 0019+734.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA 0019+734.RADCOR.1 AIPS 2: Resumes AIPS 2: CPYRT was not found to be running AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 AIPS 2: Got(1) disk= 1 user=**** type=MA G000301A.RADCOR.1 AIPS 2: Got(O) disk= 1 user=**** type=MA G000301A.RADCOR.1 AIPS 2: Resumes AIPS 2: CPYRT was not found to be running AIPS 2: Destroyed 1 extension files of type HI AIPS 2: Destroyed MA image file: catno= 16 disk= 1 AIPS 2: Disk 1 in-CNO 17 renumbered as CNO 16 AIPS 2: Disk 1 in-CNO 18 renumbered as CNO 17 AIPS 2: Disk 1 in-CNO 19 renumbered as CNO 18 >AIPS 2: Begin check for any 'standard' scratch files AIPS 2: Scratch files -- destroyed: 0 still active: 0 AIPS 2: User18263: 3243 messages, oldest written 18-OCT-2006 15:05:15 AIPS 2: Deleted 0 messages AIPS 2: Saved POPS environment in area named 'LASTEXIT' AIPS 2: Session command-line history *not* saved. AIPS 2: hamal 31DEC06 TST: Cpu= 2.8 Real= 153 /home/hamal/vlbacald/run/AK485_2000MAR03_1.0.run finished on Wed Oct 18 17:01:50 MDT 2006